Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by John Hopkins
 - May 24, 2013, 14:54:10 PM

Whenever you remove or replace exhausts you should fit new crush washers..when you buy them they look like hollow hoops but when you fit them they compress to fill any gaps..they are a use once then discard.

John.

Posted by ski.dive
 - October 19, 2010, 13:48:20 PM

the link:

http://www.smog-marbling.html

does not show up

can someone re-post it please
~thanks

Posted by chief
 - October 08, 2010, 12:15:39 PM

Marble trick has to do with blocking some epa smog stuff with marbles. IMHO the best way is to remove the stuff entirely and use coasters... no marbles needed.

http://www.vulcandrifterriders.com/coasters.ihtml

http://www.smog-marbling.html

http://www.vulcandrifterriders.com/reedvalveremoval.html

Posted by pcarrell
 - October 07, 2010, 21:40:13 PM
Quote from: Meridious on October 06, 2010, 13:01:35 PM

I have those pipes. I marbleized my bike in about 10 minutes and ended the backfiring forever. Thank goodness I had kids with marbles. Wait...I mean kids with REAL marbles. Hehe.

Marble trick did it for me too.  Cheap, and effective!
Posted by 49Reo
 - October 07, 2010, 19:26:25 PM

If the backfiring is caused by a "lean condition" created by the installation of the pipes, it can be hard on the engine; it will create higher combustion temperatures which can damage top end components, such as valves and pistons. A richer fuel mixture will eliminate the back firing problem. A good way to check if the bike is running lean is to shut it off and pull the spark plugs to "read" the color; they should be a tan to dark tan color. If they are whitish in color, the bike is running too lean; if dark and/or sooty, it is running rich. I installed a PCIII control module on my bike with Cobra 2 into 1 pipes, and totally eliminated the backfire problem.
Regards and such,
49Reo

Posted by Meridious
 - October 06, 2010, 13:01:35 PM

I have those pipes. I marbleized my bike in about 10 minutes and ended the backfiring forever. Thank goodness I had kids with marbles. Wait...I mean kids with REAL marbles. Hehe.

Posted by 1SG CAV
 - August 16, 2010, 13:00:25 PM

Plus is your smog reeds still on the bike. That was what caused all my backfiring. Plated them off, NO more backfire.

Posted by chief
 - August 16, 2010, 10:47:14 AM

Depending upon the type of backfiring and cause. If you have leaky gaskets, yes they should be replaced. ... and, personally, when I hear backfiring like that I figure the guy is a novice biker who doesn't know how to tune his bike... personal prejudice! <LOL>

Posted by Nunk
 - August 15, 2010, 13:54:17 PM

Mine does the same thing but I like it.  LOL.  Am I harming my engine?  Should I get new gaskets?  Can I leave it as it is?  Thanks in advance. 

Posted by antocas
 - August 10, 2010, 01:40:35 AM

Thank-you all ....a new set of fresh exhaust gaskets sorted that problem out. Now she sounds and runs righteous! Happy me... Thanks.  ;D

Posted by annieoakley
 - August 09, 2010, 08:49:16 AM

Glad the part is working great! ;D

Posted by tmassey
 - August 05, 2010, 22:22:13 PM

i have a 1999 drifter 1500...i had the same problem...bought a cobra fi 2000 and i have it on the stock setting that it told me to use....runs perfect now. smooth as silk.

thanks to Sandra

Terry

Posted by Duffy
 - August 05, 2010, 19:19:10 PM

I just put LongShots on my Classic FI (basically the same engine) and had the dreaded popping also.  Mine turned out to be the front pipe had not seated correctly.  Loosened and re-adjusted and now all is good (I used the old gaskets also).

I have Straight shots on the Drifter and it doesn't pop at all but does have a "gurgle" on decel.

Posted by chief
 - August 05, 2010, 10:02:56 AM

Yeah, too much air... either you have a gasket leak OR (like me) you need a EFI add-on to compensate. I had to add a Cobra FI2000 to mine to get rid of the decel backfiring (after I triple checked that there were no air leaks around the exhaust gaskets). There are several boxes you can choose from ... the Cobra was the easiest and did the trick with no tweaking. Check the accessories area of the web site.

SMF spam blocked by CleanTalk