GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by CDNRatMan
- March 26, 2014, 08:25:54 AMQuoteand I'm not going out to check it...
so dissapointed that you would not venture out and check that for me, when ever you have a question for me I will always go and look at my bike to help you out.
it is the first crank and then the headlight will coem on and stay on, do not ask me how I know this fact, because I learned it at 0230 this morning...more to follow......once I am home again.....
ok there is the upper and lower bulb in the speedo housing, when you start your bike the upper one is on and the lower is off and not powered, once the bike is started and the highbeam switch is activated the lower bulb will be lite. All issues solved......
Posted by CDNRatMan
- March 25, 2014, 21:37:37 PMQuote"crank" signal
was thinking that......
Quotethen you have an old sweeper hose or something don't you?? Just run the exhaust out the window or door.... there you go!
already thought of......
Posted by greenbarn
- March 25, 2014, 20:49:57 PMIt's been so BLASTED LONG since I've ridden my bike, I've forgotten... Does the engine have to actually run, or does just turning it over (cranking) bring the light on? For some reason I was thinking if it doesn't start the first crank, and you let go of the starter button, the headlight comes on?? I could very easily be wrong on that - and I'm not going out to check it... (right now it's about 20F with a wind chill of around 5F. They're changing Ohio's nickname to "Little Canada"...)
Ratman, if it's just the "crank" signal you need, then just hit the starter button. If it does actually have to run, well, then you have an old sweeper hose or something don't you?? Just run the exhaust out the window or door.... there you go!
Posted by Troll
- March 25, 2014, 17:55:13 PMThe engine has to be running to turn on the headlight relay. Once the relay is on, it will stay that way until you cycle the key. The running lights come on with the ign. but the headlight doesn't.
Posted by 2beers
- March 25, 2014, 15:45:49 PMNot trying to step on Troll's answer, Ratman, but we believe you are correct. The high beam indicator will not illuminate without the bike running. Glad to hear you have a limit, btw!
Well, we have good news! Blue's warning lights are back to being fully functional. We did a happy dance in the garage, but forgot to video it lol.
Checking continuity on each segment with an ohm meter, we found a section interrupted between the oil pressure switch and harness side of the dash connection. Tracing the wire, we opened the left side cover above the tool box to reveal a mess of wires. One was not connected, guess which one? Pic below.
After that, we lost power to the ignition circuit and the neutral light. There was some spousal discussion about lighting installation and circuitry and choices a certain husband makes, I admit it lol. Happy days were restored to the household when we found two blown fuses.
All is, once again, well!!!!
Posted by CDNRatMan
- March 25, 2014, 15:17:17 PM Troll, I have a question now.
I do not profess to be a mechanic or even close to one so this might be a weak question. So there is 2 bulbs in the speedo housing, for simplicity sake one is the upper and then the lower, because that is were they sit in the housing.
You said
Quotebut the power is from the high beam circuit. Sooo this mysterious "lower" bulb is actually working as designed.
So tonight I tried to see if there was power going to the plug, had a good ground, tester was showing power to a couple of the plug outlets. But none to the one I want. I tried it with the high beam on and off. Tried it with the key in the on position.
Ok so on the 800 the headlight does not come on till the bike is started and running, so to check this would the bike have to be running? Even I draw the line at starting the bike in the living room.
Thanks.
Posted by Milky1112
- March 25, 2014, 13:56:57 PMQuote from: CDNRatMan on March 25, 2014, 13:49:53 PMFair enough, Just glad the mystery is solved for sure tho.. so we don't sit here and lose our minds anymore then we have already..ok but you are half way to the picture list....just to let you know.
Posted by CDNRatMan
- March 25, 2014, 13:49:53 PMok but you are half way to the picture list....just to let you know.
Posted by Milky1112
- March 25, 2014, 13:41:12 PMQuote from: CDNRatMan on March 25, 2014, 13:27:09 PMHey now! I'm helping.. and causing trouble lol.. Remember i'm new to this bike unlike you vets hereAsk PC what happens to people I am not happy with........
Posted by CDNRatMan
- March 25, 2014, 13:27:09 PMAsk PC what happens to people I am not happy with........
Posted by Milky1112
- March 25, 2014, 13:26:05 PMQuote from: CDNRatMan on March 25, 2014, 13:24:11 PMYep, now i have everyone ripping their speedometer apart too.. mwuahahahaha.. my evil plan is working!lol....ok never noticed that it was that way......but now I can check farther and see if it is right...........that Milky guy sure had us confused......
Posted by CDNRatMan
- March 25, 2014, 13:24:11 PMlol....ok never noticed that it was that way......but now I can check farther and see if it is right...........that Milky guy sure had us confused......
Posted by 2beers
- March 25, 2014, 13:04:29 PMQuote from: Troll on March 25, 2014, 12:47:44 PM2beers is askeered of the dark lolLet me ask you a question...do none of you ride at night?
I was just going to post a pic of the wiring diagram, Troll, answering that high beam question! You beat me to it 
Posted by Milky1112
- March 25, 2014, 12:57:30 PMQuote from: Troll on March 25, 2014, 12:47:44 PMOnly when my eyes are closed...Looking carefully at the wiring diagram reveals that there is just 1 illumination bulb for the speedo, and the other one uses the same ground, but the power is from the high beam circuit. Sooo this mysterious "lower" bulb is actually working as designed...talk about a rabbit hole! Let me ask you a question...do none of you ride at night?
Posted by Troll
- March 25, 2014, 12:47:44 PMLooking carefully at the wiring diagram reveals that there is just 1 illumination bulb for the speedo, and the other one uses the same ground, but the power is from the high beam circuit. Sooo this mysterious "lower" bulb is actually working as designed...talk about a rabbit hole! Let me ask you a question...do none of you ride at night?