Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by 49Reo
 - August 17, 2010, 12:53:10 PM
Quote from: aclone on August 16, 2010, 16:02:33 PM

Hope this helps.  I used nomad passenger floor boards ( got a great deal on them) . On the right side I just welded a washer to the stock exhaust bracket and used the gromet and washer from the stock exhaust. On the left made a bracket that was close to the right side one. And used the floor board bracket as on of the installion points. In your case I would make a plate that bolts between the bike and the bracket for the rear peg.  You have to bolt down the bracket with at least two bolts . I tried it with one  and the pipe moves to much.
Mark

Great; thanks for the info and pics;
Regards and such,
49Reo

Posted by aclone
 - August 16, 2010, 16:02:33 PM

Hope this helps.  I used nomad passenger floor boards ( got a great deal on them) . On the right side I just welded a washer to the stock exhaust bracket and used the gromet and washer from the stock exhaust. On the left made a bracket that was close to the right side one. And used the floor board bracket as on of the installion points. In your case I would make a plate that bolts between the bike and the bracket for the rear peg.  You have to bolt down the bracket with at least two bolts . I tried it with one  and the pipe moves to much.
Mark

Posted by aclone
 - August 16, 2010, 09:16:10 AM

Sorry have been out of town. and did not see ypur post will send pic later tonight.
Mark

Posted by 49Reo
 - July 30, 2010, 22:38:27 PM
Quote from: aclone on July 26, 2010, 22:32:47 PM

First do you have hard bags?  If not it's alot harder. You can use the stock bracket for the right side but you have to modifity the end. Also you have to turn the exhaust 90 degrees so the bracket will bolt to it.  For the left side you have to make a bracket. If you cut the tips flush the drifter tips will fit on.
Mark

Hi, no, I don't have hard bags. Would you happen to have some pics of the mounts you used to bolt these pipes to the stock footpeg bracket? I just got my bagger pipes today; looks like some fabbing coming up. Any help is appreciated.
Thx;
Regards and such,
49Reo

Posted by 49Reo
 - July 28, 2010, 09:09:38 AM

Thanks, guys, for the info; the pipes I ordered came in, and they managed to send me shortys for a Mean Streak! ;D Oh well, the waiting game goes on.
Thanks again;
Regards and such,
49Reo

Posted by aclone
 - July 26, 2010, 22:32:47 PM

First do you have hard bags?  If not it's alot harder. You can use the stock bracket for the right side but you have to modifity the end. Also you have to turn the exhaust 90 degrees so the bracket will bolt to it.  For the left side you have to make a bracket. If you cut the tips flush the drifter tips will fit on.
Mark

Posted by chief
 - July 26, 2010, 20:39:40 PM

Did you look at the mod over on the web site?

Posted by 49Reo
 - July 26, 2010, 17:19:32 PM

Howdy, everybody out there in Drifterland; a quick question for those of you in the know: I would like to mount a set of V&H bagger duals on my 1500 Drifter; what all extra do I need to do this? Do I need to pick up rear foot peg mounts for a Classic, or can I use the foot peg mounts for the Drifter? (I would still need to buy the left hand Drifter foot peg mount anyway as mine came without) Any help would be appreciated. ;D

Regards and such,
49Reo

SMF spam blocked by CleanTalk