Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by motosickle
 - April 07, 2010, 18:19:33 PM

 thanks for the info....

Posted by chief
 - April 06, 2010, 10:53:50 AM

There are a couple of the discount oem guys listed on the web site in the vendors section.

BTW BikeBandit has a iphone/itouch app that allows you to search the parts diagrams on your iphone/itouch. It works and is quicker than the websites!

Posted by MaggieQ
 - April 06, 2010, 08:37:35 AM

for OEM parts I have found MotoGrid to be fairly reasonable pricewise.  They have all the part numbers and diagrams available so you can find all your own part numbers and just make an order and not have to worry about the incompetence of the seasonal monkey on the other end of the phone.

Posted by motosickle
 - April 04, 2010, 19:03:30 PM

i found the part # for the pull rod. kawasaki- 46102-1374

Posted by motosickle
 - April 02, 2010, 19:05:37 PM
Quote from: pohlease on April 02, 2010, 11:59:00 AM

I have a very similar problem....great job figuring it out. What part numbers did you have to order?

i ordered thru powersportspro.com (can use bike bandit too) and ordered the pull rod & gasket. i didn't save the kawasaki numbers. my dealer is useless, they don't even keep gaskets in stock. you can email me direct if you need more diagnostic info......motosickle@yahoo.com

Posted by pohlease
 - April 02, 2010, 11:59:00 AM

I have a very similar problem....great job figuring it out. What part numbers did you have to order?

Posted by chief
 - March 28, 2010, 16:23:01 PM

Thanks.

Posted by 1999 Drifter
 - March 28, 2010, 16:12:44 PM

 ;D ;D

Posted by motosickle
 - March 28, 2010, 14:18:10 PM

well folks.... i have a good clutch now! no longer is grabby and creeping forward. the pull rod was indeed broken where it slides in the shaft. i'll post pictures after i finish touching up the paint on the frame

Posted by motosickle
 - March 16, 2010, 19:49:36 PM

well, i found what i believe is the problem. the pull rod id broken where it slides in the clutch hub.it pulls the plates,but not at the straight angle it should be. i'll have to order a new rod and gasket to find out if i am a good guesser.     

Posted by motosickle
 - March 15, 2010, 19:36:21 PM

 i have had a issue with the clutch not disengaging. i thought it was stuck plates from sitting. today, i removed the clutch cover then the plates. nothing stuck. adjusted the cable several times (top & bottom adjusters). anyone had an issue with the release arm? i am going loopy thinking of what may be wrong.

SMF spam blocked by CleanTalk