Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by 49Reo
 - January 30, 2013, 09:39:51 AM

That's one for the mods/tips section for sure; saves a lot of work.

How's the bike coming?

Regards and such,
49Reo

Posted by drifter-paul
 - January 30, 2013, 00:56:04 AM

You don't need to drain the radiator to get the starter motor out. Remove the starter motor wire, and the single-wire switch on bottom of radiator. Undo two bolts on left holding starter in place, insert blade screwdriver on right side of starter and wiggle/pry to the left - settle starter motor on engine block/radiator. Undo bolt holding top of radiator to frame, move radiator 1'' forward and then up until s/motor drops into hand of assistant.. 

SMF spam blocked by CleanTalk