GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by drifter-paul
- November 23, 2021, 00:38:52 AMHave you had the speedo console off recently ? At the front there is a L bracket on the console inner side, that goes into an oval rubber slot on the frame. Use a bit of grease/spit to lube the insertion slot - it is easy to push it off . Only the lowest of the 3 hex nuts on the triangular idiot lights, plate needs to be removed . Then you push forward on the whole console.
Posted by chief
- September 22, 2021, 15:48:04 PMQuote from: Highc5555 on September 22, 2021, 10:35:43 AMI am experiencing a very high-pitched chatter coming from but instrumentation escutcheon. if I put my hand on it while going down the road, the chatter will stop. Does anybody know how to tighten this thing up or any other solutions?
If you will go to kawasaki.com and look at the parts diagram, you will see how it is connected. You might want to take it apart and clean and inspect it. That may resolve the issue. 99/00's have a speedo cable, so you may want to have a look at that as the source of the noise.
Posted by Highc5555
- September 22, 2021, 10:35:43 AMI am experiencing a very high-pitched chatter coming from but instrumentation escutcheon. if I put my hand on it while going down the road, the chatter will stop. Does anybody know how to tighten this thing up or any other solutions?