GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Old Drifter
- August 07, 2020, 15:29:16 PMQuote from: ecader10 on August 07, 2020, 09:35:04 AMYes, the 1500 and 800 Drifters I am told, share the same front end.will a 1500 front fender fit an 800?
Posted by Troll
- August 07, 2020, 13:46:47 PMThey are supposed to be the same, but the PNs will differ due to paint scheme...
Posted by Bucko
- August 07, 2020, 12:10:56 PMQuote from: ecader10 on August 07, 2020, 09:35:04 AMNot sure. One way to check would be to compare the part numbers but then the colours are different so the part number are not going to match.will a 1500 front fender fit an 800?
Posted by ecader10
- August 07, 2020, 09:35:04 AMwill a 1500 front fender fit an 800?
Posted by Old Drifter
- July 20, 2020, 16:14:22 PMGreat job! Looks great as far as fitment, however it does make the Drifter rather odd looking. Hopefully you can locate a Drifter front fender at a decent price.
Posted by ecader10
- July 20, 2020, 07:02:49 AMSo i was able to mount a classic front fender to my drifter. I had to widen the mounting holes on the fender by 1/8th in both ways to match the forks. Then i put a spacer between the fender and the fork using a bolt with a locking nut to hold them in place. Worked like it was made for it.
Posted by ecader10
- July 14, 2020, 12:57:09 PMI think i am going to try and see if i can make the classic mount on there. If i get it to work i will be sure to show you what i did.
Posted by Troll
- July 14, 2020, 12:20:40 PMfender mountings are totally different. Classic fender mounts from the inside out, the Drifter, outside-in..and there is a third mounting hole on the lower fork leg. Classic fender has a better chance, but you will have to figure out how to secure the bolts with nuts on the inside
Posted by ecader10
- July 14, 2020, 10:31:55 AMWhat about a 2003 800 Classic fender on a 2006 800 Drifter?
Posted by Troll
- July 13, 2020, 20:42:48 PMMean streak has an inverted fork, so the short answer is no
Posted by ecader10
- July 13, 2020, 19:47:29 PMSo i bought my bike missing a front fender. i have tried buying a new one but with the covid stuff going on i havent gotten my hands on one. Can i make a meanstreak front fender fit until i can get on to fit my 800?