Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by GiacoBress
 - October 02, 2019, 11:55:44 AM

Coolant level is ok and the fan does turn on, however, after that, the spark plugs of the front cylinder stopped working, I would think it is something on the wiring that is causing this, I would like to know a different opinion about it, the bike has no more than 14k miles

Posted by greenbarn
 - September 30, 2019, 21:08:56 PM

Need to start with some basics.  Have you checked the coolant level on the bike?  If the antifreeze is low, it will overheat quickly.  Is the cooling fan coming on ?  (radiator fan)   If it is getting hot (or if the sensor says it's getting hot) the fan should run.  Post back with what you find.

Posted by GiacoBress
 - September 30, 2019, 14:50:35 PM

Hi guys!

I have a problem with my VN 1500 Drifter, after 3 min of having the engine on, the temperature light and the fuel light turns on, then the starts to lose power and the rear cylinder starts with some explosions while riding, can someone help me understand why?

Thanks!

SMF spam blocked by CleanTalk