Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by BlackBlueMagoo
 - January 12, 2018, 10:35:58 AM

Yes. The kit came with the Spring/Kevlar Friction Clutches/New Steel Plates and a Primary Gasket!

Posted by Pilgrim
 - January 11, 2018, 21:21:12 PM

Good report back. Thanks Did the spring come with that kit?

Posted by BlackBlueMagoo
 - January 11, 2018, 20:07:26 PM

I did some more checking into the specs on the fiber clutches/steel plates..I guess what gave it away for me was the discolored steel plates(Black&Blue mainly) and the fiber clutches were worn down badly(it was my Brothers bike & I really know nothing about it)..!
I Bought Barnett Carbon Fiber Clutch Pack..went back together fairly well..it gave me a much firmer clutch handle pull..but I can deal with that..got tons of clutch and with the new Syn oil & fiter..I'm sure that I can scratch this off the to do list!
Got Good Info from Everyone. Thanks to all...Respects

Posted by Bucko
 - December 08, 2017, 18:45:54 PM
Quote from: Pilgrim on December 05, 2017, 06:43:41 AM

I updated my 2001 to newest clutch spring with two holders and have had no problems.

Same.
Posted by Pilgrim
 - December 05, 2017, 06:43:41 AM

I updated my 2001 to newest clutch spring with two holders and have had no problems.

Posted by chief
 - December 04, 2017, 21:24:22 PM

I have monitored this situation since 2001. Early on, the weak clutch "spring" was replaced with beefed up alternatives. The 2002 Mean Streak spring for example. However, Kaw upgraded the spring and holders and this setup is used in all 1500/1600 Vulcans after that date. I used this setup and have been happy with the results. Simply update your setup to the newest spring and the two holders.

Two pages to look at:

1) for the spring part numbers.

http://www.vulcandrifterriders.com/clutchparts.html

2) Procedure for replacement:

http://www.vulcandrifterriders.com/clutchspringreplacement.html

NOTE: You can adjust the break point on the clutch a bit by adjusting the dial on the clutch lever.

Posted by BlackBlueMagoo
 - December 04, 2017, 11:36:12 AM

I did not realize that you can not adjust a Hydro Clutch(I'm used to oil bath clutches in my old HDs)
As far as the Clutch Spring..I hear and have read that many riders put in a Meanstreak Spring/and others have used the Barnett Spring! Is one better than the other?? I'm going to mike the clutch plates as long as I'm into the clutch end..maybe they need to be replaced also! Thanks for your Time...

Posted by greenbarn
 - December 03, 2017, 22:23:54 PM

The 1500 is notorious for clutch problems.  There is a spring in the clutch that wears out.   There are several different versions of improvements.... There are lots of posts on this forum - this is one that has a few links to some of them

http://www.vulcandrifterriders.com/forum/index.php?topic=32568.msg71219#msg71219

The clutch fluid you mentioned might help some,, but I don't know of any way to actually adjust it.

Posted by BlackBlueMagoo
 - December 03, 2017, 20:38:42 PM

Have a 99/1500J Drifter..has been sitting for a while..did the brakes and desided to take it out for a putt..clutch either does not grab or slips! I have no idea of when the oil was changed..and I do not know if its possible to adjust that clutch?? The bike has 44K on it and I have No Idea of what was done with it in the past! I'm going to flush/re-fill the Clutch Fluid, drain and change the oil tomorrow.. to see if it helps. Whats Your Idea on my clutch problem?? Thanks.

SMF spam blocked by CleanTalk