Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by CDNRatMan
 - March 25, 2017, 18:47:36 PM

  There is enough room in that headlight bucket for a dinner for four and a snack pack as well......lol, I have 3 relays in mine and the power pack for my LED headlight and not an issue.....

Posted by pumppy10
 - March 25, 2017, 18:33:58 PM

yea i see what you mean by lots of room in the head light bucket, that thing is massive. I will take you good advice and run a relay to be safe. Thanks.

Posted by greenbarn
 - March 25, 2017, 10:51:25 AM

Yes, you "should" use a relay.  However both of mine came with running lights hooked up- and they were wired directly into the low beam circuit.  They had not had any issues yet, with melted wires and blown fuses, etc., but I re-wired both bikes with a relay circuit.  There is a hot wire in the headlight bucket you can use to power the light, or run a dedicated wire from your battery.  Then use the low beam light to trigger the relay on , with a switch of course in the circuit to turn them off if you wan to.  there is plenty of room in the headlight bucket for the relay.

Posted by pumppy10
 - March 25, 2017, 10:08:18 AM

I got a set of aux lights from e bay last week and low and behold no install instructions. The kit came with turn signals but i think i am going to just mount lights to turn signal bar allready from stock. I know i read a really good post on here not that long ago about hooking this stuff up but can not find it again. Should i use a reley for running lights?

SMF spam blocked by CleanTalk