Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by RockinRollin
 - December 21, 2016, 19:52:48 PM

Will do, the fuel controller just arrived but no parts from Chuckster yet. With the Christmas season here it might take a little longer.

Posted by bambam0099
 - December 21, 2016, 19:39:29 PM
Quote from: RockinRonny on December 15, 2016, 11:29:48 AM

Just got off the phone with Joe Norris at Chucksters, I ordered the right side conversion kit for $175, it is supposed to come with everything I will need (other than a fuel controller). Again the best part is that I will be able to use the original air breather covers. The kit is 7" and the old filter cover is 9" that will leave a 2" opening right around for air. I could even cut a hole in the backing plate for a little more from the left side filter but it's probably not necessary. Many thanks to everyone for advice and input. I will keep you posted.

Did you mention my name so I can get a discount when I order?! :-)

Interested in your progress and of course, "build" pics!

Counting the days I can take her out of storage again....

Posted by RockinRollin
 - December 18, 2016, 05:25:30 AM

Thanks , I will have a look.

Posted by Troll
 - December 17, 2016, 18:45:31 PM

all you need to do to stop the backfire on decel is 1) be sure the pipes aren't leaking, and 2) close off the air intake port to the P.A.I.R. valve. If you still had the original air cleaner installed, there is a big 1/2" hose that runs to the back of the right side airbox. If you plug that off (marbling) the pop will stop. I removed the P.A.I.R. valve and plugged the sensor port completely, and then sealed the 2 big hoses that run to the coasters... This is an emission device similar to what cars had 25 years ago.

Posted by RockinRollin
 - December 17, 2016, 08:47:16 AM

I am experiencing a fair bit of back firing on deceleration. I bought my bike with the aftermarket exhaust already installed. The previous owner told me the bike shop who installed the pipes said there was no need for a fuel controller. I don't think opening up the air will help this any. I plan on installing a fuel controller for this reason alone.
I'm sure the neighbours will appreciate it.  :)

Posted by Troll
 - December 16, 2016, 13:53:14 PM

I didn't put a fuel processor on mine, and I have a Peace Pipe on, right now. I found no need to disturb the original fuel programming. Bike runs strong, gets good fuel mileage, and has no strange running issues, surges or backfires....The stock exhaust system actually flows more air than the peace pipe. I get about 2 mpg less with the peace pipe, running at 80 mph, than with the stock exhaust. I get the same if I keep the speed to 70...

Posted by DC
 - December 16, 2016, 10:54:23 AM

So do you need to run a Power Commander with this mod? 

Posted by RockinRollin
 - December 15, 2016, 11:29:48 AM

Just got off the phone with Joe Norris at Chucksters, I ordered the right side conversion kit for $175, it is supposed to come with everything I will need (other than a fuel controller). Again the best part is that I will be able to use the original air breather covers. The kit is 7" and the old filter cover is 9" that will leave a 2" opening right around for air. I could even cut a hole in the backing plate for a little more from the left side filter but it's probably not necessary. Many thanks to everyone for advice and input. I will keep you posted.

Posted by Washbrook
 - December 14, 2016, 18:38:10 PM

The RHS filter cover sticks out a little more but it is hardly noticable. http://www.vulcandrifterriders.com/forum/index.php?action=dlattach;topic=24247.0;attach=7617;image . I retained the originals on both sides and nobody has ever noticed the changes..

Posted by RockinRollin
 - December 13, 2016, 16:36:43 PM

You and a few others on this forum design and custom build your own parts - the envy of most of us and I appreciate any input from you for this reason. I have some mechanical ability and given enough time and guidance could replicate your mods. But unfortunately time (my spare time) is at a premium. If I could I would do this entirely myself just for the job satisfaction. I still might. It would take me a couple of weekends to fabricate the parts and install, if I work one overtime shift I could pay for the parts 3X and install with time left over. Sometimes it's about cost effectiveness.

Posted by Troll
 - December 13, 2016, 13:42:54 PM

Wow, I just looked at the Chuckster kit...it's just like what I made for myself for under $75 complete....including the K&N air filter!

Posted by RockinRollin
 - December 13, 2016, 11:31:44 AM

I am interested in all options, are you going to get your kit for the Drifter from him?
I sent him a message, I see he also makes lowers and badges.

Posted by bambam0099
 - December 13, 2016, 11:08:00 AM
Quote from: RockinRonny on December 13, 2016, 10:59:39 AM

Thanks bambam good to know, does Chuckster make a kit for the Drifter? I think the Nomad and Classic backing plates and filter covers are smaller but as Troll already showed us you can make the backing plate smaller. That in turn would allow you more choice in filter covers. He has a few nice ones.

I'm about 99% sure I wrote him and asked about the Drifter and fitment but, if interested, I would write him to be sure.
Posted by RockinRollin
 - December 13, 2016, 10:59:39 AM

Thanks bambam good to know, does Chuckster make a kit for the Drifter? I think the Nomad and Classic backing plates and filter covers are smaller but as Troll already showed us you can make the backing plate smaller. That in turn would allow you more choice in filter covers. He has a few nice ones.

Posted by bambam0099
 - December 13, 2016, 05:56:37 AM

Personally, I love Chucksters air kit
http://chucksterscustoms.com/product/bak-1500-1600-1700/

but I like symmetry so I want both sides to look the same although, maybe a nice long horn on the left side would be ok.  I know it's expensive but you get what you pay for.  I plan on purchasing before spring.

I bought Chucksters ultimate baffle for my Nomad and the build quality of his work was incredible and of course, I love the sound.  He seems like a really cool, stand up guy.

SMF spam blocked by CleanTalk