Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief
 - October 10, 2016, 15:22:57 PM

If you want to do a complete clutch replacement ... do what the dealer said.

But, you should measure the plate package and determine if they need to be replaced. On my 2002 1500, I replaced the friction plates at the same time I replaced the clutch spring... I did NOT replace the other springs or the steel plates. Measure them to see if they need to be replaced.
AND... use the part numbers provided in the below mod. This replaces the weaker original spring and singler holder to a stronger spring and double holders.
http://www.vulcandrifterriders.com/clutchspringreplacement.html
Posted by drifter-paul
 - October 09, 2016, 00:05:52 AM

I just used the updated kawasaki pieces from the mean streak.

Posted by UGLY
 - October 08, 2016, 16:30:18 PM

DID YOU PUT THE JUDGE WASHERS ON WITH THE MEAN STREAK. I DID   WOW   IT IS GREAT. JUST A LITTLE MORE PRESSURE ON THE LEVER.

Posted by drifter-paul
 - October 08, 2016, 06:35:45 AM

I've replaced the diaphram plate twice. The second time I did the Mean Streak mod (at about 126,000 K/ 80,000 miles). I relaced the 10 springs, but only because I'd already bought them from the States.  I measured no difference between old and new. Plates etc remain unchanged.

Posted by chuckc
 - October 07, 2016, 09:48:12 AM

Hello,

I have an 02 Drifter 1500 and the clutch is beginning to slip.  I've read the following post (and the linked articles) and the OP had a question about the 10 92145-1243 springs that was never answered.  I have the same question and the local dealer said I should replace these 10 springs along with the plates and other springs, holders etc.

#this was the original post that asked about the 92145-1243 springs:
------------------------------------------------------------------------------
http://www.vulcandrifterriders.com/forum/index.php?topic=39081

Should I replace those 10 springs while I'm in there?

Thanks

SMF spam blocked by CleanTalk