Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by tj
 - September 17, 2016, 14:23:23 PM

add me to the list of hand jockeys! lol
...just installed, damn cool.

Posted by DC
 - August 12, 2016, 17:34:56 PM
Quote from: CDNRatMan on August 11, 2016, 13:01:12 PM

I really like the looks of the hand shifter and the looks you get when you actually use it are so funny......

I came to an intersection near a bar and stopped at the light.  When I started back up and used the hand shifter, a guy standing on a balcony above the bar was so mesmerized, he almost went over the railing.   ;D
Posted by CDNRatMan
 - August 11, 2016, 13:01:12 PM

  I really like the looks of the hand shifter and the looks you get when you actually use it are so funny......

Posted by DC
 - August 11, 2016, 11:58:19 AM

I have Ted's shifter on my bike.  Love it!   8)  It definitely gets a lot of looks and has people asking a lot of questions.

Posted by RockinRollin
 - August 11, 2016, 11:50:59 AM

Yep, that's the place Ted's Designs

Posted by mittico68
 - August 11, 2016, 02:33:03 AM
Quote from: Mike O on August 10, 2016, 22:23:07 PM

Where can you purchase the hand shifter kit?

Here's the link: http://www.vulcandrifterriders.com/Teddrifter-hand-shifter.html

Posted by Mike O
 - August 10, 2016, 22:23:07 PM

Where can you purchase the hand shifter kit?

Posted by mittico68
 - June 03, 2016, 02:20:36 AM

Thanx bud!

Posted by Trall
 - June 02, 2016, 19:54:17 PM
Quote from: mittico68 on June 02, 2016, 12:08:38 PM

Okay. Well done.
BTW, where did ya get those tank stickers? I like their brigthness and variety of colours...

The war bonnet tank I bought from link below and I had local autobody shop apply and clear coat.  Mine are gold leaf and they also have silver leaf sets.  I really like the multi-color of the decals in the sun.  They tie in all the colors on my bike from the red, gold, black and white colors.

You can also get them with or without Drifter name.

http://winnerscyclegraphics.com/DrifterIndian.html

Posted by mittico68
 - June 02, 2016, 12:08:38 PM

Okay. Well done.
BTW, where did ya get those tank stickers? I like their brigthness and variety of colours...

Posted by Trall
 - June 01, 2016, 14:19:42 PM
Quote from: mittico68 on June 01, 2016, 10:41:22 AM

That's really interesting... but I wonder if it bothers your leg because of its overall width...

No problem there.  The derby cover is only about 1/4" thick so that's all your adding.  The derby cover is sitting directly on top of flat centered area air cleaner with two felt pads added to keep from metal to metal contact in case there was any vibration from riding. The outer three derby cover bolt area with fuel line used as spacer bolt covers is from the contour/bevel of air cleaner.  So overall your only adding 1/4" thickness.  No issues with legs at all.

P.S. I also have a painted 2nd air cleaner cover that I can change out for variety that has two bolt studs I added to air cleaner cover for small related medallions or smaller badges for variety as well. I am working on some of those now.  Look back in this thread for those. 

Posted by Trall
 - June 01, 2016, 14:18:18 PM
Quote from: RockinRonny on June 01, 2016, 10:36:24 AM

That looks cool. Never thought of an engraver to make up a plate. That is what you did?

Here's the steps-  Buy Indian Derby Cover found one on Ebay for $50 with free shipping, The Trophy Plaque Business engraver only did the words "Tribute" and "Drifter" for $15 cost.  The Cover itself is called a Indian Derby Cover (Primary cover) from/for some Indian Motorcycles.  I just retrofitted it to mount to my 800 air cleaner.  I placed the Derby cover on the inside portion of my air cleaner cover, centered it, marked three holes, drilled out holes to 1/4",  bought 1" length x 1/4" size chrome machine bolts with allen head tip, placed two furniture felt pads on front on air cover to keep near center bolt stem for air cleaner (to keep from metal and metal contact) screwed on three bolts onto the three nuts on inside of air cleaner, then used JB Weld epoxy and a small tip screwdriver and applied epoxy around all sides of the three nuts (don't have a welder), let set overnight and now can remove derby cover when needed to access air cleaner cover.

Place on air cover to bike and replaced acorn nut with standard nut for tighter clearance for Derby cover, center air cover with the tree holes that align to derby cover, tighten air cleaner cover, put on derby cover, make sure it's centered for lettering, add the three bolts with added 3 cut pieces of 1/2" length fuel line to the inside space of derby and air cleaner covers (just to cover bolts and look finished) and tighten to complete.

Overall fits my 800 well and looks great on the bike while paying homage to Indian.

Posted by mittico68
 - June 01, 2016, 10:41:22 AM

That's really interesting... but I wonder if it bothers your leg because of its overall width...

Posted by RockinRollin
 - June 01, 2016, 10:36:24 AM

That looks cool. Never thought of an engraver to make up a plate. That is what you did?

Posted by JagLite
 - June 01, 2016, 10:27:39 AM

That looks fantastic!

SMF spam blocked by CleanTalk