Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by jagered
 - August 20, 2016, 07:39:33 AM

Solo Seats ARE NOT interchangeable... without some modifying and then maybe not even.  DOUBLE CHECK BEFORE PURCHASING.

For whatever reason, manufacturers like Corbin made design changes that made some seats not work.  I recently got a seat, that I had to send back, that was off a 2000 Drifter 1500 and would not work on my 2002.  Some were saying to extend the bolt or bend the washer plate... neither would work since the washer plate would not slide under the bar/plate riveted to the seat...

Before trading any seat, I STRONGLY suggest getting pictures of the front where it mounts... both on the seat and their bike, as well as multiple pictures showing the condition... so you know exactly what you are getting.

CIAO!

Posted by drifter-paul
 - August 19, 2016, 21:49:14 PM

The older I get the less patience I have  >:(

I got tired of changing the brackets over between the solo and the dual seats, so I made my own out of a strip of aluminium strap -
50mm x 3mm (2" x 1/8") - $ 3 from the local hardware store in 1 metre lengths.

Took about an hour to make both using a hacksaw, bastard file , hammer and bench vice, and squirt of rattle can black.

Just use the original as the template. They just centre the seat - the weight is taken thru the pan.  :)     

Posted by BugzeeMalone
 - August 19, 2016, 04:11:36 AM

I am looking for one too.
If anyone has or sees one for sale please PM me
Ray in Taupo New Zealand

Posted by pcarrell
 - August 03, 2016, 08:57:18 AM

Winner, winner, chicken dinner!

Posted by thenemos
 - August 02, 2016, 13:22:33 PM

Thank you.  I actually found one on ebay.  It should be here this week.

Posted by pcarrell
 - August 01, 2016, 08:48:11 AM

Any Drifter 1500 seat will fit any Drifter 1500, regardless of year, provided you have the two little metal ears to bolt to (you can move them from seat to seat).  Drifter 800 seats are the same......800 to 800 Drifter.  Drifter 800 seats and Drifter 1500 seats are different, and not interchangeable.  Nomad and Classic seats are different, though a few have adapted them to fit Drifters, but it's not a straight bolt up deal.

Posted by thenemos
 - July 31, 2016, 16:17:30 PM

Can anyone tell me if solo seats are interchangeable between different VN1500s, or different production years?  In other words will a Drifter solo seat made for a 05' fit my 99', or will a solo seat made for a Classic or Nomad from 03' fit my 99'?

SMF spam blocked by CleanTalk