GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by mittico68
- August 11, 2016, 02:33:03 AMQuote from: Mike O on August 10, 2016, 22:23:07 PMWhere can you purchase the hand shifter kit?
Here's the link: http://www.vulcandrifterriders.com/Teddrifter-hand-shifter.html
Posted by Mike O
- August 10, 2016, 22:23:07 PMWhere can you purchase the hand shifter kit?
Posted by mittico68
- June 03, 2016, 02:20:36 AMThanx bud!
Posted by Trall
- June 02, 2016, 19:54:17 PMQuote from: mittico68 on June 02, 2016, 12:08:38 PMThe war bonnet tank I bought from link below and I had local autobody shop apply and clear coat. Mine are gold leaf and they also have silver leaf sets. I really like the multi-color of the decals in the sun. They tie in all the colors on my bike from the red, gold, black and white colors.Okay. Well done.
BTW, where did ya get those tank stickers? I like their brigthness and variety of colours...
You can also get them with or without Drifter name.
Posted by mittico68
- June 02, 2016, 12:08:38 PMOkay. Well done.
BTW, where did ya get those tank stickers? I like their brigthness and variety of colours...
Posted by Trall
- June 01, 2016, 14:19:42 PMQuote from: mittico68 on June 01, 2016, 10:41:22 AMNo problem there. The derby cover is only about 1/4" thick so that's all your adding. The derby cover is sitting directly on top of flat centered area air cleaner with two felt pads added to keep from metal to metal contact in case there was any vibration from riding. The outer three derby cover bolt area with fuel line used as spacer bolt covers is from the contour/bevel of air cleaner. So overall your only adding 1/4" thickness. No issues with legs at all.That's really interesting... but I wonder if it bothers your leg because of its overall width...
P.S. I also have a painted 2nd air cleaner cover that I can change out for variety that has two bolt studs I added to air cleaner cover for small related medallions or smaller badges for variety as well. I am working on some of those now. Look back in this thread for those.
Posted by Trall
- June 01, 2016, 14:18:18 PMQuote from: RockinRonny on June 01, 2016, 10:36:24 AMHere's the steps- Buy Indian Derby Cover found one on Ebay for $50 with free shipping, The Trophy Plaque Business engraver only did the words "Tribute" and "Drifter" for $15 cost. The Cover itself is called a Indian Derby Cover (Primary cover) from/for some Indian Motorcycles. I just retrofitted it to mount to my 800 air cleaner. I placed the Derby cover on the inside portion of my air cleaner cover, centered it, marked three holes, drilled out holes to 1/4", bought 1" length x 1/4" size chrome machine bolts with allen head tip, placed two furniture felt pads on front on air cover to keep near center bolt stem for air cleaner (to keep from metal and metal contact) screwed on three bolts onto the three nuts on inside of air cleaner, then used JB Weld epoxy and a small tip screwdriver and applied epoxy around all sides of the three nuts (don't have a welder), let set overnight and now can remove derby cover when needed to access air cleaner cover.That looks cool. Never thought of an engraver to make up a plate. That is what you did?
Place on air cover to bike and replaced acorn nut with standard nut for tighter clearance for Derby cover, center air cover with the tree holes that align to derby cover, tighten air cleaner cover, put on derby cover, make sure it's centered for lettering, add the three bolts with added 3 cut pieces of 1/2" length fuel line to the inside space of derby and air cleaner covers (just to cover bolts and look finished) and tighten to complete.
Overall fits my 800 well and looks great on the bike while paying homage to Indian.
Posted by mittico68
- June 01, 2016, 10:41:22 AMThat's really interesting... but I wonder if it bothers your leg because of its overall width...
Posted by RockinRollin
- June 01, 2016, 10:36:24 AMThat looks cool. Never thought of an engraver to make up a plate. That is what you did?
Posted by JagLite
- June 01, 2016, 10:27:39 AMThat looks fantastic!
Posted by tj
- May 31, 2016, 21:12:54 PMQuote from: Trall on May 31, 2016, 13:11:52 PMI think it's the perfect size...looks awesome!The engraver got it done. It turned out pretty good and the letter is similar to the Indian name. Wished it was slightly bigger letters but that was the largest font that would fit the space and the engraver's machine. The next font was too big for the space.
I used 1/4 " fuel line hose on the inside to cover up the bolts to give it a finished look from the spacing.
Overall it looks great on my Drifter and paying tribute to Indian.
Posted by Trall
- May 31, 2016, 13:13:08 PMMore pic
Posted by Trall
- May 31, 2016, 13:11:52 PMQuote from: tj on May 25, 2016, 20:32:13 PMThe engraver got it done. It turned out pretty good and the letter is similar to the Indian name. Wished it was slightly bigger letters but that was the largest font that would fit the space and the engraver's machine. The next font was too big for the space.very cool idea...love it!
I used 1/4 " fuel line hose on the inside to cover up the bolts to give it a finished look from the spacing.
Overall it looks great on my Drifter and paying tribute to Indian.
Posted by tj
- May 25, 2016, 20:32:13 PMQuote from: Trall on May 25, 2016, 15:02:32 PMvery cool idea...love it!The first pic you see is at the engraver now and not sure how it will turn out. It's a Indian Derby Cover and the engraver is adding Tribute above the Center Indian name and adding Drifter below the Indian name. This is more of the Indianized by using Indian o the bike.
All of these I recently acquired and still working on finishing details for they can be mounted at times.
Posted by Trall
- May 25, 2016, 17:54:38 PMQuote from: RockinRonny on May 25, 2016, 16:40:47 PMJust search Ebay for Indian Art and various items come up now and then, just find sizes that will fit onto the air filter cover. The one on the bike now was a large belt buckle, grind off the buckle metal not needed on the backside and place and find and drill out two bolt holes that will fit right on the piece and on the air filter. Use two bolts, two lock washers, two acorn nuts to mount as studs on the air cleaner and add a few thin felt furniture pads as needed, to the backside of emblem if needed and mount with the two acorn nuts.......Wow, are they (the air breather covers) all the same? I was wondering what kind of metal they were made of, I would love to powder coat mine white but the powder coating process involves an oven baking that probably caused the glue to run out. Good to know.