Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by tj
 - August 08, 2016, 11:57:19 AM

Spent a few hours connecting and disconnecting wires on the tail/brake light circuit...no luck. It blows the fuse as soon as the ignition is turned on. Feels like I'm chasing my tail.
I guess there will be no riding at night.

Posted by tj
 - August 08, 2016, 08:26:26 AM

Thanks for the replies.

Here is what i found this morning.

Turned key on...lights ok
Started bike, without touching the brake...fuse blown within a few seconds.
Disconnected rear lights at the fender...fuse blown as soon as ignition is turned on.

Going to get more fuses.

Posted by Troll
 - August 08, 2016, 03:44:26 AM

Disconnect the wires at the front brake light switch and check to see if it stills blows the fuse. Check the wires at the front brake switch CAREFULLY, I know I have pinched them once or twice when I reassembled the switch housing after lubing the throttle cables....

Posted by tj
 - August 08, 2016, 00:03:44 AM

Gents,

I'm in need of some assistance.

I'm in Stugis enjoying the riding...until the fuse for the tail/brake light blows. I've replaced the fuse, checked the brake and all is well. As soon as i start the bike and apply the brake, it blows. I've checked connections in the headlight bucket and fender connection...nothing obvious.

Any suggestions are appreciated.

SMF spam blocked by CleanTalk