Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by jack freeman
 - July 09, 2016, 14:09:20 PM

hello
I have 02 & 06 800 driter . 02 scootworks saddlebag brackets , 06 osprey brackets . Both work very well . But osprey
easy to remove 2 bolts left , 2 bolts right side brackets & bags are off your bike . just as easy to install . ( note )
bolts must be very tight . mounting bolt holes are slot . heavy bags can drop sometimes .
scootworks bracket has 5 bolts each side  to remove bracket & bags & very hard to aline to install . both work and look
very nice. you have to tweek each to what you want to work for you .  me I like ospray best . ospray brackets are heaver
steel than scootworks . anything I can help with  contact me

Jack

Posted by OR Seedman
 - July 06, 2016, 23:12:10 PM

when I get the templates from Osprey, I will take some pics and post.  I will also see what a couple of mock-ups for quick release will run me...any input from interested parties is welcome....

Posted by allstateguy
 - July 06, 2016, 21:20:30 PM

I'd like to see pix of what you have in mind. Plus a projected shipped cost CONUS.
I've got an 02 800 w/solo seat.

Posted by OR Seedman
 - July 05, 2016, 19:30:02 PM

So...I thought I would update anyone who is interested that I have been communicating with Trall regarding bag mounts from Osprey.  Since they no longer make them, I was able to order the right side 800 mount and the same right side mount for the 1500 from them (again thanks to Trall).  I am going to take them over to a large fabricator near my work (I work with them quite a bit on custom ag research equipment) and get a price on making sets of each including powder-coating.  I would like input from any interested parties as to what modifications, if any, you think would improve upon the current mounts....like maybe a 2 piece quick disconnect system (like the one on scootworks but without the massive amount of steel they use) or anything else...I will try to keep the costs down to a minimum, so keep that in mind on any ideas or mods.....

in the meantime...ride safe  ;D

SMF spam blocked by CleanTalk