GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by JagLite
- July 01, 2016, 11:28:57 AMI installed my new hand shifter and tested it out.
Nicely made and it works great!
I do find it odd that the kit comes with SAE (American) bolts instead of Metric to match the rest of the bike.
No worries, just odd.
Shifting is easy and rather "rubbery" feeling like my old VW van. 
It is kinda fun watching the hand shifter move when I use the foot shifter. 
Only once did I start in second gear at a stop sign when I thought it was in first.
I can feel the gears move much better with my foot but I will develop the feel with my hand soon.
Excellent packaging for shipping protection too.
I wish all companies would make the effort to properly pack items.
I will give it two thumbs up on the cool rating 
And a 9.5 on the Ten scale, only losing half a point for not using Metric bolts.
Highly recommended!
Posted by JagLite
- June 16, 2016, 23:19:08 PMThat's excellent!
Posted by CDNRatMan
- June 16, 2016, 16:21:30 PMI wanted to keep the stock seat because there is times I ride 2 up, then on long trips I like my sissy bar pack as a backrest. But it was not comfortable nor good looking, so I took it to a custom seat maker. For less than $300.00 I got a gel insert added and memory foam, now it is super comfy and really looks good, I had the step steepened, slightly raised and then the leg areas shaved down a bit to make the seat narrower, and had my butt area sloped back a bit to make it more a bucket seat.
Posted by JagLite
- June 16, 2016, 15:08:11 PMQuote from: rawbz36 on June 16, 2016, 11:38:45 AMNot sure if this makes sense to you, but the bike looks clean and crisp! Definitely a good thing. The only thing I do not like the the stock 2up seat made by Kaw. I wish they would have made it look a little cooler. Great job. Jealous of your skills!
Rob
Thanks guys!
Rob, I agree with you about that ugly seat!
But it is very comfortable for me alone, and for my wife if she is with me.
I am thinking of ways that I might be able to hide/conceal it with a bit of luggage.
Perhaps a small rack behind the seat with a bag always on it.
I usually have a roll bag on the passenger seat that I use as a back rest for long rides but that doesn't improve the looks of the seat hanging in the air back there...
Posted by rawbz36
- June 16, 2016, 11:38:45 AMNot sure if this makes sense to you, but the bike looks clean and crisp! Definitely a good thing. The only thing I do not like the the stock 2up seat made by Kaw. I wish they would have made it look a little cooler. Great job. Jealous of your skills!
Rob
Posted by DC
- June 16, 2016, 11:31:23 AMLooks like a very serious bike. . . almost like military, police, or S.W.A.T.
Posted by mittico68
- June 16, 2016, 09:01:44 AMReally a nice job and a cool result!
Mes compliments, mon amie!!
Posted by JagLite
- June 13, 2016, 22:44:51 PMThanks, I'm happy enough with the new exhaust that I don't feel a need to change mufflers right away.
I think it might get a bit more volume as the muffler gets burned in.
I have a similar straight through Borla on my Miata and it is also not loud but sounds great.
I seem to recall that when I installed it on my car 14 years ago that the first week or so it was very soft then as it burned in it got a bit more growl to it that hasn't changed in all these years.
I just got back from another after work ride and I am getting more comfortable guiding the beast around.
It really does require a different style of riding compared to my light, tall, and instant response dual sports.
Now to plan a weekend camping trip...
Posted by CDNRatMan
- June 13, 2016, 16:33:45 PM 
that came out really nice.
Posted by JagLite
- June 13, 2016, 15:55:15 PMFinally got the Drifter back together and went for a ride.
As always I rode first to a big empty parking lot and practiced slow speed maneuvering.
So HEAVY! But after just a minute or so I got the feel back and soon I didn't have to think about starting, stopping (hard and quick), turning or shifting. It is so different from my other bikes that I need to get used to it again even though I have been riding my other smaller lighter bikes. She may be heavy but she sure is comfortable to ride! 
The black pin stripe on the fender crease will probably wait until the winter project season stops my riding.
Same with the solo seat mounting I need to make. Right now I just want to ride.
Back from a short hour ride I took a few pictures.
With the tank bag on:
And with it off:
And all mixed up:
Posted by greenbarn
- June 07, 2016, 21:31:11 PMJag, keep working on it if you don't like it....
If you want a glass pack, shoot me an email and I can see if I can get you one and ship it to you for a decent price. I buy wholesale for auto exhaust....
Posted by CDNRatMan
- June 07, 2016, 20:57:14 PMif it is quiet think of the wildlife you can sneak up on and get some really cool pictures...lol.......
a very different look for sure.
Posted by JagLite
- June 07, 2016, 16:52:26 PMUpdate time.
The weather here has been very unusual... 
That means I have been out riding my other bikes and not working in the shop on my bike projects.
But it finally rained on Saturday so I finished welding up the new exhausts system and took it for a ride.
I haven't painted it yet, I wanted to burn off any oil and contaminates before painting it stove black.
The flex tube is double wall with the inner being 1.625" ID and the outer is 1.875" ID.
I had planned to put pipe wrap over the inner tube (inside the outer) but there was no chance of that.
Maybe if I had been able to get 2" ID outer tube.
The muffler is a Borla with a 3" ID core and it is straight through, before I welded my own end caps I could roll a tennis ball through it.
(I think, I didn't try)
So I was very amazed at how it sounds.
It is hardly any louder than stock!
Sounds much better, but it is soooooooo quiet.
I may cut the tailpipe off, cut a larger hole through the end cap and weld on a larger diameter tailpipe.
The tailpipe is 1.75" on it now so I could go to a 2.25" and try that.
I don't want it to be real loud, just loud enough that I can hear the exhaust over the mechanical engine noise.
But it does sound like a MOTORcycle now, just a quiet one.
I'm not real happy with how it came out.
The front pipe should have been 3" or so longer to have the connector farther back.
Not simple to cut and add length in the flex.
The muffler is just too big in diameter to look the way I saw in my mind.
Experimentation continues (on rainy days)
I am looking at what glasspack mufflers (3.5" OD) I can get (so many places won't ship to Alaska) and I may switch over to one, and mount it farther forward.
I also look at the hole left under the swingarm and think about what kind of storage box I could put down there.
I could weld up a removable auxiliary fuel tank, or a big tool box, or general storage, etc.
If I relocate the reg/rec from the left side to the front it would be easy access to the under swingarm storage.
Next winter project list.
Posted by greenbarn
- May 17, 2016, 20:23:39 PMNice looking bike, Jag! It's coming together.
Posted by CDNRatMan
- May 17, 2016, 14:18:16 PM I tried really hard one winter to put tint in the inside of the windscreen and found it really next to impossible due to the curves and shape of the windscreen.
So I fell back on an old idea from fish keeping, for years I used to spray paint the outside back of all my fish tanks. Once it dries it looks really good. So I tried it......
I used gloss black paint to spray the inside of the windscreen let it dry for a few days and cure nice then replace the hardware and it looks really good, hides a lot of the clutter in the area and wires are hidden. I like the looks of it.