We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Quote from: MikeakaFred on June 30, 2016, 10:55:28 AMNice Looker!I guess the finished product would be in order..
Great idea, as well: Heat shields. I raised my bags to provide more air. But a heat shield would allow me to lower that bags and provide an overall better "look"...
Me like!
I guess the finished product would be in order..
I think what I did to make a heat shield for the bottom of my bags might be useful to someone on here.
I started with a trip to the local muffler shop to pick up a piece of heat shield from underneath a car....in this case I don't know what it came from but it was stuck in a corner of the shop.
I wanted an air gap between the exhaust, the heat shield and the bag itself.... the shaping began !
I held the remolded shielding material to the bag with self tapping screws to the inside lip of the bag itself. If you look at the pic with the bracket to the bike, you can see the screws. The other pics are just more of the same shield from different angles .
There is about a half inch between the bag, shield, and the exhaust..I used it like this last year and could keep a water bottle in that bag and it was quite drinkable after a long ride. This worked for me !
In the past, I have burnt a hole in a bag from a pipe on a different bike...embarrassing to say the least and burning leather does not smell like a well done steak ....just in case you were wondering. lol
Any questions or if I forgot something, let me know.
Page created in 0.082 seconds with 12 queries.