Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Last Edit: June 26, 2016, 12:15:26 PM by allstateguy
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by pietperson
 - June 25, 2016, 16:21:13 PM

If I order the dynojet kit for the 800 Vulcan will I get the correct needle? They don't list what needle is in the kit, just says it is for the stock engine.
pietperson

Posted by allstateguy
 - June 23, 2016, 21:32:34 PM

I bought my jets from jetsrus.com and the dynojet kit for 800 Drifter off of eBay.

Posted by CDNRatMan
 - June 23, 2016, 21:17:42 PM

Here is the progressive springs GreenBarn and I used in the front of our bikes they are for a 1500.....

http://www.progressivesuspension.com/product/1465/fork-spring-kit

this is the rear shock I used on my 800

http://www.progressivesuspension.com/product/1426/465-series-shock

I used a AFAM front sprocket bought through the local dealer 18T then for the rear I went with a JT sprocket 38T both in steel

Posted by pietperson
 - June 23, 2016, 20:51:55 PM

Where do you get the jets for grampsizing? The article mentions OEM and Dynojet but I can't find the size jet and needle called for listed anywhere. Is the dealer the source for parts or where? also where to get progressive front springs and sprokets?
pietperson

SMF spam blocked by CleanTalk