Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by jmbo
 - June 23, 2016, 17:03:32 PM

This should do it....1500 Classic rotor.  Looks dern cool ta me!

Posted by Bucko
 - June 23, 2016, 13:45:11 PM
Quote from: Tfrank59 on June 22, 2016, 17:09:08 PM

Course the other reason for holes in a brake rotor is to cool it better.

I think it depends on what you mean by 'cool it better'.  If the hole(s) diameter is larger than twice the thickness of the disk, there's a net loss of surface area for cooling. Not sure though, maybe having holes near the centre of the braking 'ring' of the disk - presumably where it's hottest - may remove heat quicker even with less surface area?
Posted by jmbo
 - June 23, 2016, 07:55:25 AM

Why not go for a 1500 Classic rotor instead?

Posted by CDNRatMan
 - June 22, 2016, 20:09:31 PM

  I bought a VN 800 Classic rotor and put it on and it looks good and was not expensive, and married right on. Check for a used on  ebay and as a machinist you will be able to ensure it is flat.

Posted by Tfrank59
 - June 22, 2016, 17:50:24 PM

yep, I saw that. so with the front one what were they going for some retro look or something?

Posted by Troll
 - June 22, 2016, 17:39:28 PM

Your rear one is vented...

Posted by Tfrank59
 - June 22, 2016, 17:09:08 PM

I'm considering putting some holes in the front rotor of my drifter whenever I get that wheel off to change the tire. I noticed that it has one deep score in it, I guess were a rock or something got caught in there, and that's going to happen when there aren't any holes in the rotor. Course the other reason for holes in a brake rotor is to cool it better. So I'm a machinist and I can put the holes in it, but I'm not a mechanic or engineer to know if that's going to adversely affect braking. I imagine the only issue would be if the brake pads aren't compatible with the rotor that has holes – can't imagine that being a problem but who knows. Any comments?

SMF spam blocked by CleanTalk