Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by chief
 - February 03, 2011, 21:50:06 PM

Did you check the web site for info.

You can use a long thin screwdriver and insert it under the rubber to break loose the glue and help to twist it off. If you have an air compressor, air can be helpful. The throttle side has a sleeve and is easy to remove.

Posted by cochise
 - February 03, 2011, 21:11:08 PM

My 800 came with a set of T bars ( handlebars )  and nice Kuryakn iso grips. I picked up a set of stock bars and risers, ( I like the traditional look better ) , and would like to put the grips on the stock bars. Tried to remove the left side first, to no avail , and an internet search shows the company includes super glue for the install. One suggestion was a screwdriver blade followed by brake cleaner spray, hairspray ect  to dissolve the glue or a razor knife and 4" grinder. Anybody ever been here before? I'd like to reuse those grips.

SMF spam blocked by CleanTalk