Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Tfrank59
 - June 08, 2016, 20:14:48 PM

yeah, that's a tough one with the toe and all.  I really suck on electrical, but I'll just echo Ratman, that it's going to be something simple like the kill switch, unless somehow a wire got broken or unplugged moving the bike around.  I'd say start with all the things you can check visually, and if need be play with some wires while trying to make her crank--in case it's a loose connection and just a jiggle gets it to fire for you.  also, just thinking out loud--you're sure the battery connections are good and tight, right?  maybe double check em.  let us know what you learn.  good luck!

Posted by CDNRatMan
 - June 08, 2016, 17:23:35 PM

 ok I am mulling over the thought of what could be wrong here, sorry about you have a bad week, not sure what is wrong with the bike, but when you did the foolish thing of moving it sans proper footwear, did by chance use language unfit for a lovely lady as your Drifter is to hear you and perhaps think you were directing your vulgar language in her direction and so she is getting back at you.......

ok you have done what I would have done, kill switch is on, everything else is working normal, lights, horns, fuses all look correct,

what about the IC Igniter?

Posted by tj
 - June 08, 2016, 16:33:11 PM
Quote from: tj on June 08, 2016, 15:49:53 PM

sorry about you toe...glad you're ok tho!

regarding the bike, it sounds like the side stand switch to me. did you try and jump the wires going to the switch? if it was me, i would start there.

just thought about it again...side stand switch shouldn't matter if neutral light is on.
Posted by Pilgrim
 - June 08, 2016, 16:21:05 PM

check wire connector is tight at clutch lever, or is that just on the 1500? main fuse blown?

Posted by tj
 - June 08, 2016, 15:49:53 PM

sorry about you toe...glad you're ok tho!

regarding the bike, it sounds like the side stand switch to me. did you try and jump the wires going to the switch? if it was me, i would start there.

Posted by Trall
 - June 08, 2016, 13:40:42 PM

I had one heck of of week.  Last Wednesday, I made an error in common sense and was moving/staging my Drifter without shoes on from her storage corner of my garage where she sleeps in slumber to the main garage door to get her ready to ride to work and in the process had a mishap with a parking block for my car on the floor and had the kickstand make contact with my left big toenail and bend it back 90 degrees.  Ouch to say the least.   After the initial pain train left, I parked her back in  her spot.  Called in for work and went to the doctor in the morning for nail removal.

Fast forward......Now it's a week later (Tuesday night) toe sore but can wear boots again, pulled  bike out from corner to get her ready to ride again with boots on  ;D and my bike won't start or even try to start.  Placed her back in corner storage.  I pulled battery, I work 3rd shift and this morning had Autozone test and they said it was good.  Passed Oriely's and what the heck, stopped and battery tested good.  Got home and bike does not start or even tries to start.

I checked over wiring to make sure everything seems secure, connected and tight.  Checked the small fuse panel block right next to battery and pulled all fuses and all good.   Called local Kaw. dealer and since I had a Walmart battery of unknown age, wanted to change it out, just to prevent an future issue and cross off the list of current issue.  I bought new dealer Yuasa AGM high performance battery for $90.  The tested old battery and it tested good so I was hoping it was bad but another good test.

Went home installed new battery same result.  Nothing - no noise, no cranking like before from starter button.  New battery so thats not the problem.

I called dealer and they have a two and 1/2 week waiting period for them to check it out.

I was hoping someone here can spoon feed me on what to check next of most likely's and how to check it since I no nothing about electrical otherwise will have to wait it out.  I own a multi-meter but never used it.

My bike ran fine about 10 days ago and the previous 6 rides this year.  No issues beside changing out petcock because of fuel leak but ran fine after repair and three rides later all good.  It's a 2001 Drifter 800 now with 2700 miles and bought from original elderly owner in Nov. 2015.

New Yuasa battery- June 8th, 2016

History- The kill switch is off, the petcock was on, full tank of gas,  the turn signals, brake lights, horn work.  The bike is in Neutral with the green N light on.  Kickstand is up and tried it down but no changes. Also tried it in gear but no changes.  Everytime, I pull in clutch lever and press starter button with ZERO sound, no noise, no cranking.

Now I need spoon fed on what and how to do what checks if someone has the time..........Thanks........................

SMF spam blocked by CleanTalk