GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by JagLite
- May 16, 2016, 16:04:49 PMFinally healthy enough to spend a few hours in the shop playing with my bikes.
I washed one that was still muddy from last fall (DR650 dual sport) and took it for a short ride.
Then I put the Drifter war bonnet stickers on the tank.
Now to finish up the exhaust system and call it good for the summer and go riding.
Posted by JagLite
- May 03, 2016, 21:34:12 PMOooooh sweet! 
Real frosted glass instead of sun faded plastic. 
I like it!
Posted by mittico68
- May 03, 2016, 10:25:26 AMQuote from: JagLite on May 02, 2016, 09:58:20 AMIt isn't very bright though.
Since LED's are directional it could be that a light that can be mounted inside facing forward will be brighter.
Mine are mounted so that the light is shining up into the top of the Indian head.
It doesn't matter to me but it might to others.
Maybe this could help ya: http://www.ebay.com/itm/301075101491?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Posted by CDNRatMan
- May 02, 2016, 11:06:59 AM 
Jaglite seen one of them little LED lights over to Canadian Tire the other day and it was like $9.99 so bought one. I was thinking of adding it the rear of the bike. I have the stock tail light set up and right above the license plate is that red reflector. So my next winter project will be to remove that reflector and wire the LED in to the brake lights.......bit more lite back there......
Posted by JagLite
- May 02, 2016, 09:58:20 AMThe front wheel was right where I had thought I put it, next to my Honda XR80.
I looked for it there several times, and I would not be surprised if I moved it to look behind it without recognizing it.
I've been like this all my life so nothing new.
The little LED light came from the auto parts store.
It can be used as a marker light, a truck bed light, or as a dome light, etc.
It has 2 LED's in it and is weather sealed.
I just removed the original bulb socket and used silicone to glue the LED to the original metal plate.
It isn't very bright though.
Since LED's are directional it could be that a light that can be mounted inside facing forward will be brighter.
Mine are mounted so that the light is shining up into the top of the Indian head.
It doesn't matter to me but it might to others.
The light came with the wires as shown so I just used some wire I had on hand to complete the hook up.
Keep in mind that LED's only work when wired correctly.
Polarity specific? I don't remember what it is called.
Unlike typical lights that will work with either wire as ground.
Posted by mittico68
- May 02, 2016, 02:07:09 AMQuote from: JagLite on May 01, 2016, 22:37:05 PM
I bought an LED light to replace the original non-working socket and bulb.
I do envy you, because of your skillness... I wish I had such ability, with a little more memory...lol...
BTW, where did you get that led light? And was it a plug & play, or did you have to make some mod for it?
Posted by CDNRatMan
- May 01, 2016, 23:56:49 PMAnd where pray tell was the front wheel?
Posted by JagLite
- May 01, 2016, 22:37:05 PMFinally healthy enough to spend some quality time with my bikes this weekend.
I installed the front the front fender and wheel with new brake pads and black covered ss brake line and replaced the brake fluid.
All the bolts and nuts were badly corroded from the time the bike spent in Florida so I chased the threads to clean them up.
The paint in the threaded inserts was part of the problem I'm sure.
Then I spent half an hour searching for the caliper cover for the fender without success.
I decided to search again tomorrow.
I started out today by searching for the front wheel.
I had been looking for it for a couple days but unable to find it.
I knew it was in my shop I just wasn't seeing it.
I was able to find it, right where I had looked for it at least once before...
My wife says I suffer from male pattern blindness.
I guess so since I can lose something in an empty paper bag.
When she came out to check on me this evening I told her I was searching for the fender side cover.
She knew immediately where it was, in the house, by my computer.
As usual, she was right.
Why I had taken it inside I don't remember.
Not that you can tell from these pictures but the Indian on the fender is aglow with the spirit to guide me on my travels:
I bought an LED light to replace the original non-working socket and bulb.
Now to finish the new exhaust system and go riding!
I have the War Bonnet decal to put on the tank and do plan for a simple black stripe on each fender soon.
Posted by JagLite
- April 27, 2016, 21:00:35 PMHah! No memories, but a lot of greasy finger prints.
That's how I know I've done that job before.
Even if I don't remember doing it...
Posted by CDNRatMan
- April 27, 2016, 16:38:59 PM are your memories pressed between the pages of a shop manual?
Posted by JagLite
- April 27, 2016, 16:06:01 PMHmmm, door you say?
That reminds me, I don't think I have posted a picture of the sign I had made for my door...
The SPD sign that is.
The funny Garage sign I have had for a year or more.
My wife got that one for me.
I was ordering some stickers to put on my project bikes so I chose SPD for the fun of it.
Not a business since I just build projects for myself, but now I have smaller stickers for each project.
The smaller ones are exactly the same, they are 3" wide and the door sticker is 10" (I think)
Memories... how I wish I had them.... (can you hear me singing?) 
Posted by CDNRatMan
- April 27, 2016, 12:10:21 PMlike the red door eh!
Posted by JagLite
- April 27, 2016, 12:08:43 PMPaint it black as the song goes
Posted by tj
- April 27, 2016, 07:50:41 AMlol awesome! 
Posted by JagLite
- April 26, 2016, 20:40:59 PMAs close as we could get it! 