Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Last Edit: May 08, 2016, 22:32:29 PM by CDNRatMan
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by allstateguy
 - May 08, 2016, 19:47:07 PM

This is on a 2002 800 with ~6500 miles

If I have a properly adjusted cable, can't get into neutral without shutting off the engine.

If I take all the freeplay out of the cable and I can shift into neutral from first fine when the drivetrain is cold. But as it warms up it gets harder to downshift, and neutral again disappears.
If you sit at a stoplight in first, clutch pulled in, the bike will actually start to creep when warm.

So. are my clutch plates swelling up? The steels warped? I doubt this as there are no other symptoms. I've never had this happen on any of my 80 previous bikes. The clutch has plenty of grab and has never slipped regardless of adjustment.

I'm guessing a new set of plates is on the horizon. Is there a recommended set? Barnett? Stock?

SMF spam blocked by CleanTalk