GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Tfrank59
- April 15, 2016, 23:39:30 PMI'm a two wheels or four kind a guy. If not a bike, I'll be driving a convertible 
Posted by CDNRatMan
- April 15, 2016, 21:55:31 PM In Canada there is no special license required for a bike with a sidecar. However, if you take your test on a Can-Am then you have a special endorsement, you can only ride a trike or Can-Am. If you have a full class M license then you can ride everything.
Some provinces have been changing their requirements for the operation of three wheeler and Can-Ams including the slingshot and T-Rex.
Posted by Tfrank59
- April 15, 2016, 20:06:42 PMI'm just curious, if you haven't ridden since 79, why are you going for a sidecar set up? Is it that your significant other will not ride two up? Anyway that's your business, but in my state you have to have a special motorcycle endorsement for a side car, and that's because there's special skills required to ride safely with a sidecar (well not to mention even without one), and so since you been out of it for like four decades I would rethink driving with a sidecar, but that's just me. Maybe you're thinking the bike is gorgeous enough and the sidecar comes with it, and that you'll just detach it and ride just the bike? Not a bad plan – probably can sell the sidecar and recover some money. Again just my 1.5 cents
Posted by ronedawe2
- April 15, 2016, 08:12:27 AMnew guy here from Canada....I have ridden a KZ750 w sidecar for 20 yrs...looking to a Drifter 800 with a 1952 Jawa chair, hopefully using a more modern Velorex frame. I would like to hear from others who have attached a chair to a Drifter....there are ideals to strife for when attaching, for instance, rear wheels in line, etc.
Also, it would be nice if the pipes were on the left side, so the passenger is not sitting next to them...I wonder if that would be a difficult modification.
I wish I could figure out how to attach the picture I have on my desktop??
Posted by Vulcanator
- May 23, 2012, 13:14:32 PMThanks! I will grab the assemblies and wiggle to see if the bearings are shot, but it may take a shop to give me a full evaluation. Good tip on examining the chain, brakes, & spokes carefully too.
I'm not sure what a steering damper and adjustable rake tees would look like though. Would the damper be a small hydraulic cylinder between the handlebars & frame somewhere?
Posted by Troll
- May 22, 2012, 18:26:36 PMAny sidecar equipped motorcycle is going to have wear in places that the non equipped bike will not. Clutches, steering head bearings, swing arm bearings, and in your case, rear tire/rear sprocket/front sprocket and chain. Since the 800 has a spoked wheel, it would also bare mentioning that the spokes will have more stress on them than one without... and then, of course, depending on the hack having it's own brake system...some do, the service brakes on the bike...If the side car was properly installed, there should also be a steering damper, and even adjustable rake trees...
Posted by Vulcanator
- May 22, 2012, 13:26:50 PMI'll be looking at a 2000 Vulcan 800 with sidecar on Thursday for possible purchase from a private party. The last time I owned a motorcycle was in 1979. All I know about the Vulcan is it looks and sounds gorgeous, and what little I've found in web searches and reviews. Is there anything I should watch for in particular? If all goes well I hope to be a regular contributor here in a few days.