Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by NeonBlue
 - March 19, 2016, 15:21:41 PM
Quote from: jmbo on March 19, 2016, 08:15:27 AM

I know this does not answer everyones concerns but here is how I solved the gap issues on my springer.  I made a spacer panel. The ugly bolt you see was eventually swapped out for a chrome button head allen screw.  Also I have included a photo of an original Indian seat.  Indian had more hardware showing than an Drifter I have seen.

How did you fab up that front plate?
Posted by jmbo
 - March 19, 2016, 08:15:27 AM

I know this does not answer everyones concerns but here is how I solved the gap issues on my springer.  I made a spacer panel. The ugly bolt you see was eventually swapped out for a chrome button head allen screw.  Also I have included a photo of an original Indian seat.  Indian had more hardware showing than an Drifter I have seen.

Posted by JagLite
 - March 18, 2016, 23:40:27 PM

The gap at the tank is the same as my Singh solo sprung seat.
Not so clean, although it does look like the early Husky...
How many guys were made eunuchs by that bolt I wonder.

The other problem is that my seat is too far back.
The stock double seat is ugly without the saddle bags but it is comfy.
I compared actual butt position of the Singh as far forward as possible with the stock double and find the solo seat puts me back a couple inches.

I am making my own front mount that will move the seat forward and over the tank.
Of course that means I need to come up with new spring locations too.
I also got the tall and short spring sets.
The tall are too tall and the short are too short, and both sizes are too stiff.

Let us know how the hairpin springs work out as that might be an option for me too.

Posted by greenbarn
 - March 18, 2016, 20:41:41 PM

That's really a shame, Bam...  I have not previously heard anything bad about HL.  But I agree with you - I wouldn't be happy with the look either...  and 38 weeks is about 30 too many to wait...

It looks to me like you might be able to fabricate a front mount for that seat, and perhaps improve the situation a lot.  Do you have the means to do that??   Looks (to me) like it needs to go forward and higher...  Maybe you could post more pictures - close ups, different angles, etc., and someone on here could help you out.  I know D1 and Jmbo both mounted a solo similar to yours, and if I remember, they both fabbed mounts.

wish you weren't all the way on the OTHER side of NY - you could bring it over here and we'd see if we could cut and bend something up.....

Posted by bambam0099
 - March 17, 2016, 11:48:34 AM
Quote from: RockinRonny on March 15, 2016, 13:14:47 PM

That's too bad BamBam, it was a fine seat and I was hoping it would work out. I had thought about going that route also.

Believe me, I have been holding back on my comments about dealing with HL's.  Yesterday was exactly 38 weeks from the day I received a price quote (that changed several times by the way) and things are still not resolved.  I have every email and am so tempted to post them but am refraining simply because I am trying to take the higher ground. 
Posted by RockinRollin
 - March 15, 2016, 13:14:47 PM

That's too bad BamBam, it was a fine seat and I was hoping it would work out. I had thought about going that route also.

Posted by bambam0099
 - March 15, 2016, 08:47:25 AM

I posted in another thread (http://www.vulcandrifterriders.com/forum/index.php?topic=41268.0) about getting a seat from Heathers Leathers.  The seat itself is beautiful but the damn gap between the seat and the tank is unacceptable, it looks unfinished; like it wasn't made for the bike.
Plus, it crushes the fuel line when you sit on it.  Yeah, you could cob up a few washers to raise the seat and a few other things to cover up the gap but in the end, upon close inspection, it will looked cobbed up.  These bikes are too classy/unique looking for that.
The problem I've had (and still having) with HL's is that they do not have a Drifter on site to test fit their seats on.  Everything is being done from memory.  Hell, it's been over 32+ weeks and still not resolved.  I finally threw in the towel and said  " no mas' ".

Posted by jmbo
 - March 11, 2016, 09:47:31 AM
Quote from: NeonBlue on March 10, 2016, 15:45:01 PM

Love my singh seat. Few things to complain about tho. The springs are an inch or two too long and there is no battery cover plate so Ill havto figure that out. I ordered a pair of clothespin springs to replace them so I hope that works out. Ill keep you posted

My Singh seat came with two different length springs.  One set was too short.  I chipped the paint on the top of the fender when the two collided going over a huge bump.  The second set was to long so I improvised.   I heated the coils (just like i did on my old '49 Ford) and dropped the seat by at least an inch.

My only complaint is on long rides I get a bit of numb butt on my Singh.  It is not as bad as the stock seat.  I bought sheep skin duvet for the seat.  No more numb butt.

Posted by RockinRollin
 - March 10, 2016, 15:53:56 PM

I wanted to go with a springer seat but in the end I went with a Corbin. Just didn't look right.
To each his own I guess. I do like what Jmbo did with the cover though.

Posted by NeonBlue
 - March 10, 2016, 15:45:01 PM

Love my singh seat. Few things to complain about tho. The springs are an inch or two too long and there is no battery cover plate so Ill havto figure that out. I ordered a pair of clothespin springs to replace them so I hope that works out. Ill keep you posted

Posted by Bucko
 - March 22, 2015, 16:35:11 PM
Quote from: dakuhosu on July 25, 2013, 17:43:00 PM

What did you do to black out your wheels?
Posted by bambam0099
 - March 22, 2015, 15:36:35 PM

Love the seat but it would drive me nuts looking at the rear tank bolt

Posted by jmbo
 - March 22, 2015, 11:59:26 AM

Attached is a series of photos of my install.  Love the seat. Much more comfortable than the original.

Posted by Backinsaddle
 - March 21, 2015, 08:56:50 AM

It's killin me. I love the classic look of the spring seat. How do you clean up the back of the seat on the 1500? There's all the mounting points for the OEM seat and the saddle bag supports.

I've been searching, so I apologize if I'm rehashing this. I've been searching for a kit that fits. Sounds like it has to be modified. Anybody do this? how do you cover the battery compartment and still have access?

Info appreciated.

Back N Saddle

Posted by Drift1
 - July 28, 2013, 18:59:43 PM

That Singh seat looks fantastic on your 800 Btw, the way it should look. I'm getting an 800 here soon so I'm going to hold onto the seat for that maybe. Love your bike, it reminds me a little of...mine. Those painted parts really set it apart. I'll have to get a better picture of the way I actually mounted my seat, It looks pretty good.

Dakuhosa , thanks for the compliment , brother ! Can't wait to see what design your having Heather's Leather's create for you . Ride is looking great ( original ) with that paint scheme . Looking forward to see the saddle !

SMF spam blocked by CleanTalk