Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by mittico68
 - March 04, 2016, 02:14:45 AM

Thanx guys for your help.
Now, if only I could get the overall size of those HD pipes...

Posted by CDNRatMan
 - March 03, 2016, 16:40:24 PM

   Well I know that a set of pipes from a 1500 will not fit an 800, the bends are wrong.

You might have an easier time to get a pipe bender to replicate the pipes from your 800 and make those fit the pipe ends you are after........

Posted by pcarrell
 - March 03, 2016, 14:10:55 PM

I can help you this much.......the exhaust gasket that goes between the jugs and the pipes are the exact same size.

800 - Part No. 11060-1680 (all years)
HD OEM - PART # 17048-98

That means that the pipes should fit the openings in the heads, but beyond that I'm not much help.

Posted by mittico68
 - March 02, 2016, 05:35:25 AM
Quote from: CDNRatMan on March 01, 2016, 14:37:20 PM

are you just wanting to add fishtails to your pipes, are you wanting to replace the whole system, or just the muffler?

Good question...
Actually I'd like to replace the whole thing, but my real purpose is to add fishtails and a muffler less big than the OEM one.
I know there's Webike selling a niiiiice exhaust with fishtail, but it's way too much expensive for my poor bucket...

Posted by CDNRatMan
 - March 01, 2016, 14:37:20 PM

 are you just wanting to add fishtails to your pipes, are you wanting to replace the whole system, or just the muffler?

Posted by chief
 - March 01, 2016, 10:06:36 AM

I would think this would not be an easy modification.

Posted by mittico68
 - March 01, 2016, 05:43:28 AM

Hi guys, I came across a H-D 2 in 1 exhaust set (with a nice fishtail) that I really like.
Now I'm tryin' to realize if it can be adapted to ma-deuce without too much efforts.
Can anyone suggest some links to sites where you can extrapolate the size of HD exhausts?
Thanx a lot.

SMF spam blocked by CleanTalk