Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Trall
 - December 15, 2015, 21:45:32 PM

Thanks for your pic and post, I think mine is missing that metal spring so I going to call and see it I can get one.....

Posted by CDNRatMan
 - December 15, 2015, 18:21:27 PM

  ok so the visor looks the same. I hsd the same three small clips and I did have to bend them a bit, but I also had a section of spring steel in the bag with the visor that was already in a arc'ed form and I was also a bit confused as there was no instructions and I found some someplace and went with it, This is what I came up with. The spring steel holds it in place.

hope this helps

Posted by Trall
 - December 15, 2015, 15:45:30 PM

PIC

Posted by Trall
 - December 15, 2015, 15:39:57 PM

No mine has three clips and I angle the visor in the headlight gap and press down and its in place but it also come off just as quick with barely grabbing it upward.

Here is a pic

Posted by CDNRatMan
 - December 15, 2015, 15:20:41 PM

 ;) oh what a pain, just wait till you buy visors for the spotlights....now those you need 3 hands and a small multi handed small person to fit.......ok did yours not come with a piece of spring steel? I have mine off right now so will go and take pictures to show you. Mine is not super tight either but never has it moved or come off during a ride.

Posted by Trall
 - December 15, 2015, 13:32:26 PM

Can anyone tell me what Iam doing wrong?  I bought a Kawasaki Headlight Visor and it came with no directions.  I installed it but it seems if you barley bump it or touch it it wants to pop off.

You angle the small little clips inside the headlight assembly and push down and its sits in place but does not seem stable.  If you place your fingers and barely apply pressure upward it will pop right off.  My thought is if your driving it down the road the wind pressure will do just that.  Its winter time in IL so have not tried nor want to with a $35 part.

SMF spam blocked by CleanTalk