Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Old Drifter
 - October 04, 2015, 20:38:56 PM
Quote from: Troll on October 04, 2015, 20:08:09 PM

I have mine set up like on a Harley, with the rear up so when its pressed down to upshift, it THEN is even with the back of the board. I found that with it in the factory position, it was easy to miss shifts unless you were quite positive with them...maybe a cowboy heel would have helped, but I wear engineer boots!

That's exactly how I have mine (higher than foot board) set up. My toe stays on the board as I raise my heel, then come down on the lever to up shift. Works great.  8)
Posted by Troll
 - October 04, 2015, 20:08:09 PM
Quote from: Wolf74 on October 04, 2015, 19:50:29 PM

Thanks fellas, picked up a set off eBay just now. Looks like an easy install. I've never used a heel shifter so it'll be interesting to get used to. Just seems like a bike above the 1200cc class SHOULD have one.

OK, so now you can have a chance to experiment with placement. the witness mark on the shifter puts it level with the rear of the board, so you have to step back and push below the board with your heel. I have mine set up like on a Harley, with the rear up so when its pressed down to upshift, it THEN is even with the back of the board. I found that with it in the factory position, it was easy to miss shifts unless you were quite positive with them...maybe a cowboy heel would have helped, but I wear engineer boots!

Posted by Wolf74
 - October 04, 2015, 19:50:29 PM

Thanks fellas, picked up a set off eBay just now. Looks like an easy install. I've never used a heel shifter so it'll be interesting to get used to. Just seems like a bike above the 1200cc class SHOULD have one.

Posted by mittico68
 - October 04, 2015, 09:54:09 AM
Quote from: DC on October 03, 2015, 23:17:00 PM

After having a heel shifter on my Drifter, it would feel like a step backward going back to my old bike (or any other) without a heel shifter.  To me, it's much more efficient, or at least easier to shift.  You'll love it, once you get one on there.

And, all in all, it allows to keep your shoe's tip nice and clean! 8)

Posted by Old Drifter
 - October 04, 2015, 07:46:40 AM
Quote from: DC on October 03, 2015, 23:17:00 PM

After having a heel shifter on my Drifter, it would feel like a step backward going back to my old bike (or any other) without a heel shifter.  To me, it's much more efficient, or at least easier to shift.  You'll love it, once you get one on there.

X2.... When I got mine the PO had removed it.  Lucky for me he saved it and gave it to me when I asked what happend to it.

Wolf74....Check your PM's

Posted by DC
 - October 03, 2015, 23:17:00 PM

After having a heel shifter on my Drifter, it would feel like a step backward going back to my old bike (or any other) without a heel shifter.  To me, it's much more efficient, or at least easier to shift.  You'll love it, once you get one on there.

Posted by 49Reo
 - October 03, 2015, 23:05:58 PM

Any Classic, or Nomad heel shifter should fit; try eBay.

Posted by Wolf74
 - October 03, 2015, 20:39:26 PM

I just realized that my 99 1500 Drifter is missing the heel shifter. Does anyone know where I can find a replacement or if a different one would fit? Thanks

SMF spam blocked by CleanTalk