We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by Tfrank59
- September 15, 2015, 08:25:13 AMExcellent – thank you, I'll let you know how it goes. Haven't been under my tank yet, but if I can't see a color band on the hoses I might be back. 
Posted by gdrudd13
- September 15, 2015, 08:20:16 AMYellow hose at carb-This should be left open to vent
Green hose at intake-This can be capped
Blue hose at right hand of tank-This needs to stay, this is the tank vent.
Red hose on left hand side of tank-This can be capped
vacuum line- This can also be capped
This is exactly what I am running on my bike right now. All the hoses should have some sort of colored band if not, there is a diagram that I'll copy. The blue line that is being discussed is the tank vent. Run it to a place on your bike that is out of the way and you'll be fine. As for the hoses that are capped, I just used the silicon hose caps. you can buy a bunch off of Amazon for cheap. Hope this answers your question.
Posted by Tfrank59
- September 15, 2015, 08:02:34 AMI really appreciate that link, which brings up the discussion of a lot of things – especially an ongoing discussion about what to vent and what to cap off when ditching the emissions crap. I'm just afraid that without an actual diagram showing what has to happen to all the hoses (and the final result of all of your tests and revisions) that I'll screw it up and it won't even run, or maybe like with troll it'll run until the tank is half empty and then quit. You see I'm not that smart like you guys and can figure out stuff like that after-the-fact. 
Posted by gdrudd13
- September 15, 2015, 07:50:06 AMI removed all the smog stuff on my bike. Unless you have a problem with some of the components, it doesn't really do anything other than open up the tool box area on the right side of the bike. That was one of the main reasons I did it to my bike.
http://www.vulcandrifterriders.com/forum/index.php?topic=32387.msg70698#msg70698
Scroll down and you'll find the post.
Posted by LarryInSeattle
- September 13, 2015, 03:41:31 AMI am in Lynnwood. Where are you?
Posted by Tfrank59
- September 12, 2015, 22:51:05 PMQuote from: Troll on September 12, 2015, 21:30:29 PMWell right now I have quite a bit of popping on decel. Still, my exhaust back pressure isn't quite right even with baffles now in my straight pipes, so I'm going to buy some additional exhaust tips or something to help me tune my exhaust better. I believe I'm moving in the right direction on engine performance by increasing back pressure. And then once I got the exhaust where I want it, and the smog stuff is correctly removed, I can deal with rejetting the carb.Not much to doing it. All you need to do is keep an atmospheric tank and carb bowl vent. Plugging off the AIR intakes to the reed valves stops the pop on decel
Posted by greenbarn
- September 12, 2015, 21:47:45 PMThe "grampsize" mod walks you through getting rid of the additional hardware, in addition to increasing the air flow and re-jetting. You could drop the junk and leave the air box alone, if you wanted to.
Posted by Troll
- September 12, 2015, 21:30:29 PMNot much to doing it. All you need to do is keep an atmospheric tank and carb bowl vent. Plugging off the AIR intakes to the reed valves stops the pop on decel
Posted by CDNRatMan
- September 12, 2015, 20:59:43 PMSorry new to me....never heard tell of this .....
Posted by Tfrank59
- September 12, 2015, 20:48:48 PMOK, I just checked on evil-Bay for a Drifter desmog kit – nope don't see one.
Posted by Tfrank59
- September 12, 2015, 20:42:39 PMYeah, I'm just full of questions this weekend! So evidently I have a California bike – it has the emissions canister and everything underneath the right side cover – does anybody know how to do the Desmog because I don't need that stuff here in Washington state. I know that some of those vacuum hoses have to be rerouted or plugged or something, and it's way above my pay grade but I would like to do it because, well just because who likes a lot of extra junk under the hood that you don't have to have. 
I know that for Valkyries and some other bikes there is a Desmog kit with detailed instructions – any such thing out there for 800 Drifters to your knowledge?