Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by 99tango
 - June 25, 2015, 12:38:57 PM

(1) I couldn't identify the exhaust on my 02 Drifter, but 49Reo explained it is a Roadhouse, which I assume is a stock exhaust. It is hard mounted and I'd like to do a rubber mount exhaust mod. Is a 1500 Classic rear peg & exhaust mount needed? And which mod, T-Stan's or Troll's?

(2) I have some risers on the way and they mount with 1/2" bolts. Is it advisable to drill out the mounting holes on the triple tree, or can I locate double end threaded studs with larger diameter standard thread on one end and smaller diameter metric on the other? Or would that fastener need to be machined?

(3) I have no idea how you stand these Drifters upright to perform oil changes, etc. My front wheel rack wouldn't work because of the large fender, so I welded up a homemade rig.

Thanks in advance if anyone can advise on the above.

SMF spam blocked by CleanTalk