Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Last Edit: May 29, 2015, 08:09:34 AM by Troll
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by moosewing3
 - May 28, 2015, 21:09:56 PM

So I can not find a how to to put some rubber mounts on my exhaust bracket any help would be appreciated, Mrs. Moosewing has pretty much refused to ride the Drifter anymore and that's gonna cut into my saddletime. Already saying she doesn't want to take the bike to New Brunswick next month and I've been counting on that trip. Please someone save me.

Posted by chief
 - June 02, 2014, 10:34:54 AM
Quote from: moosewing3 on June 01, 2014, 15:46:54 PM

Where do you get the rubber for this mod? Is there a how to on here anywhere?

If you are talking about the T-bracket mod those grommets are taken from the frame where the "goat bladder" from the OEM exhaust was attached. If there are no grommets in those holes now, it is still an active OEM part... P/N 92071-1270.

Posted by greenbarn
 - June 01, 2014, 21:58:25 PM
Quote from: CDNRatMan on June 01, 2014, 18:47:40 PM

moosewing, fear not because GB is one heck of an awesome photo guy and will post nice clear crisp pictures of his work step by step with a write up that would make popular mechanic's green with envy.

once he starts I am sure we will have a complete synopsis on what needs to be done and were to get the parts.

Well, I'll try.  Not sure yet what I'll use.  But it's got to be done.  Rode over 100 miles today, and that vibration is awful. 
Posted by CDNRatMan
 - June 01, 2014, 18:47:40 PM

moosewing, fear not because GB is one heck of an awesome photo guy and will post nice clear crisp pictures of his work step by step with a write up that would make popular mechanic's green with envy.

once he starts I am sure we will have a complete synopsis on what needs to be done and were to get the parts.

Posted by moosewing3
 - June 01, 2014, 15:46:54 PM

Where do you get the rubber for this mod? Is there a how to on here anywhere?

Posted by greenbarn
 - May 28, 2014, 11:19:17 AM

It's on the lift table, getting ready to tear down for my Mod list...    rubber mount is on the list.

Posted by chief
 - May 28, 2014, 09:06:52 AM

The vibration is coming from the hard-mounted pipes. You have a rubber-mounted engine being strapped down by the pipe hangers... BELIEVE ME this does NOT work. Do the mod to rubber mount the exhaust right away. Its easy and quick.

Posted by Drift1
 - May 26, 2014, 21:00:05 PM

LOL GB .... I know the feeling as I did the same thing . I'm cruising along thinking I'm doing 60/65 look down and I'm pushing 85  :o .... Once you check the torque and rubber mount the exhaust the grips should do the trick . I think you'll like the ISO grips as there bigger round and very comfy . I've had no problems with my hands going numb once I changed to these grips . 

Posted by CDNRatMan
 - May 26, 2014, 20:53:54 PM

  lol thanks GB,

Quote

I see they make golf club grips, so I figured Ratman would have them...

was never a fan of Avon grips as in the damp humid days they get slippery and hard to grip properly, so I like Winn grips and Golf Pride, and both those are the best to work with also.....

Posted by greenbarn
 - May 26, 2014, 20:49:54 PM

Yea, the 1500 is S--M--O--O--T---H at higher speeds.  The other day, I was meeting up with a buddy to go on a ride, and when I looked down I was doing 80, and didn't even realize it.   I don't have that problem with the 800...   It does vibrate a bit more at top-end, but not bad at all.   The 1500 is definitely a low-rpm issue - I was hoping that the rubber exhaust mount and the re-torquing the motor mount will take care of it.  I want to put grips on anyway - I like the bigger grips better anyway.

Has anybody tried the Avon air-cushioned grips???    I see they make golf club grips, so I figured Ratman would have them...

Posted by Drift1
 - May 26, 2014, 20:39:45 PM

GB I'd have to believe the majority of your problem is the hard mount . The ISO grips will help out , but I'm not to sure how well with the vibration your talking . I have these grips on both bikes and absolutely love the difference they have made . The 1500 came with them installed already , but I'm also not experiencing the bad vibration you are . I have more vibration in the 800 at high speed that is 72+ mph and the 1500 is like troll said , " smooth as glass " , but that's a whole nother story ...... LOL  ;)

Posted by CDNRatMan
 - May 26, 2014, 11:47:34 AM

  Seriously I went to the ISO grips and they made a big difference.

Posted by pcarrell
 - May 26, 2014, 09:38:22 AM

I got ISO Grips that I covered with leather, and then got some gloves with gel palms.......problem solved!

Posted by CDNRatMan
 - May 26, 2014, 08:57:09 AM
Quote

At certain idle speeds/conditions, it makes the whole windscreen shake

be like one of them shake things to lose weight from the 60's ......... just think of the weight you can lose in the parking lot......
Posted by greenbarn
 - May 26, 2014, 07:42:29 AM

That motor mount was supposed to be #4 - I remembered reading your earlier post on how much difference that made.  Definitely going to check that.  At certain idle speeds/conditions, it makes the whole windscreen shake.  Enough to make any Harley owner proud...

SMF spam blocked by CleanTalk