GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by gdrudd13
- May 26, 2015, 09:47:18 AMMy first true automotive "passion" (still is one of them) was off road vehicles. Some of the stuff you see on lifted vehicles is scary. Full sized trucks seem to be more common, or at least far more noticeable than other types of vehicles. The things that always got me were the torsion bar lifts, the lift blocks on the rear axle, and the huge body lifts (spacers that lift the body off the frame). That doesn't mean they're all bad, but when taken to the extreme, they are. Torsion bar lifts ride horribly too. So stiff. Lift blocks are known to cause axle wrap, sometimes to the point of making leaf springs S-shaped. Thankfully things have gotten better since the jungle gym lifts went out of style (these were trucks mostly that had like 20 inches plus of lift and had so much extra tubing that the suspension resembled a jungle gym). It was pretty common to see lift blocks on the rear axle like 12" tall. It was rediculous.
Posted by CDNRatMan
- May 25, 2015, 17:28:57 PMoh right and that makes what difference Mountain Man or Man Mountain.......
Posted by 49Reo
- May 25, 2015, 16:42:59 PMQuote from: CDNRatMan on May 25, 2015, 10:11:46 AMSeems like a good idea to me, then the axle will be getting lub at the same time as driving.........makes sense to me.......
yeah, but you live in Ontario...... 
Posted by CDNRatMan
- May 25, 2015, 10:11:46 AMSeems like a good idea to me, then the axle will be getting lub at the same time as driving.........makes sense to me.......
Posted by greenbarn
- May 25, 2015, 08:08:06 AMHow true, PC. I just thought it was interesting to pass on. It's amazing some of the stuff I see.... 
Half of it is brought on by those illustrious automotive engineers.... like the Trailblazer, with the front axle that goes through the engine oil pan.... now who came up with THAT idea?? Sheesh, they like to make a job hard....
Posted by pcarrell
- May 25, 2015, 08:04:10 AMSo this is "bad"? 
If it wasn't for shade tree mechanics who didn't know what they were doing, you'd loose half your business!
Posted by Troll
- May 24, 2015, 16:19:54 PMYa can't fix stupid, but with enough duct tape, you can muffle it...
Posted by greenbarn
- May 24, 2015, 15:59:40 PMSo thin this young guy brings his new Chevy Silverado 2500 in - 2014 with a 6.6 diesel. He had installed a lift kit, obviously wanting that cool look. Trouble is, he wanted as much cool as he could get, so he torqued the torque bares up all the way too, to get as much height as possible. The upper control arms were clear against the stops - this is not with the truck up on a jack - but sitting on flat ground!! The thing rode like the proverbial log wagon.!.! Of course this put the axle at "quite" a bad angle - (pic 2 shows the left axle, still in one piece) putting loads of strain on it. Ended up breaking the right axle- actually pulled it apart... what a way to go...