Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by greenbarn
 - February 21, 2015, 08:29:34 AM

Looks like the cap on the back is NOT available separately as an OEM part:
http://www.ronayers.com/Ignition-SwitchLocksReflectors-C383924.aspx

Ron Ayers wants $105 for a new ignition switch.

Maybe try cleaning the one you have with electrical contact cleaner real good, then let it dry, and then seal the crack with silicone sealer.  This might keep the moisture out enough that you won't have to replace it for a long time.

Posted by kw-retrorider
 - February 21, 2015, 05:09:04 AM

Should be able to buy a new one at a dealer or parts house, but here's a used one with matching gas cap on ebay

http://www.ebay.com/itm/00-Kawasaki-VN-Vulcan-Drifter-800-Lock-Set-Ignition-Cap-And-Key-/381034420161?pt=Motorcycles_Parts_Accessories&hash=item58b76bd7c1&vxp=mtr

Posted by Matchu116
 - February 21, 2015, 04:09:57 AM

Hi I am having problems with my 800. Every now and then when I turn the key it doesn'tmake contact or if it does make contact the bike won't start. I can get it to start and run fine without issue most days but if moisture is in the air it really gives me a problem. I pulled the switch off and noticed the plastic back plate is cracked does anyone know where I can get one or have one I can buy and switch it out.

SMF spam blocked by CleanTalk