GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Troll
- December 27, 2010, 10:40:12 AMI'm going to go out tot he garage a little later today. The front end is all off my 1500, so I can actually look at the circuitry without having to take anything apart. In the mean time, here is a scan of the affected circuits you need to examine
Posted by Troll
- December 26, 2010, 15:22:24 PMI have a factory shop manual for the 1500 '01 through '03.....I'm assuming, since you said horns that it's a 1500. If it is, then I will scan the wiring diagram and post it if you want. If it will help, the red and black wire carries the current to the high beam circuit, and the hot side of the high beam indicator lamp The high beam switch bridges the blue and yellow with the red and black. The blue and yellow wire carries the current from the headlight relay, triggered by the ECM. The fuse is for the whole circuit, and not for each beam.
Posted by rawv
- December 26, 2010, 13:13:41 PMAfter changing the horns out , I removed the horn and turn signal button control from the bars thats it now after putting it back together the high beam and blue light indicator won't come on ,I checked the connectors and fuses , does anyone have any other ideas because it really doesn't make any sense to me ,it should an easy fix any ideas appreciated. Thanks Rick