Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Last Edit: December 27, 2010, 10:42:16 AM by Troll
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Troll
 - December 26, 2010, 15:22:24 PM

I have a factory shop manual for the 1500 '01 through '03.....I'm assuming, since you said horns that it's a 1500.  If it is, then I will scan the wiring diagram and post it if you want.  If it will help, the red and black wire carries the current to the high beam circuit, and the hot side of the high beam indicator lamp The high beam switch bridges the blue and yellow with the red and black. The blue and yellow wire carries the current from the headlight relay, triggered by the ECM. The fuse is for the whole circuit, and not for each beam.

Posted by rawv
 - December 26, 2010, 13:13:41 PM

After changing the horns out , I removed the horn and turn signal button control from the bars thats it  now after putting it back together the high beam and blue light indicator won't come on ,I checked the connectors and fuses , does anyone have any other ideas because it really doesn't make any sense to me ,it should an easy fix any ideas appreciated.   Thanks    Rick

SMF spam blocked by CleanTalk