Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by greenbarn
 - February 03, 2015, 20:36:27 PM

Here's another thought....    Just thought of this.
http://www.amazon.com/TruFuel-6525638-50-Pre-Blended-Equipment/dp/B0062F5RYQ/ref=sr_1_cc_3?s=aps&ie=UTF8&qid=1423016114&sr=1-3-catcorr&keywords=stihl+fuel

I think these are available at the hardware store.   Buy a can of "canned gas", use it in the chain saw, and then use the can over for gas storage on the bike....  This makes it pretty cheap.  If the lid will re-seal.

Break out a can of red spray paint, and away we go... 

Posted by CDNRatMan
 - February 01, 2015, 19:43:54 PM
Posted by John Hopkins
 - February 01, 2015, 12:50:03 PM

I'm pretty lucky, we have plenty of gas stations over here, although some are not open 24 hours and this meant that I had to slow down to stretch out the fuel back in 2013 when I did my Iron Butt ride. The drifter has a very good reserve compared to my other bikes. I did a round the coast of Britain, 4500 miles in 2012 on a Shadow 1100 which I had to push when it ran out.. No time limit on that one..

John.

Posted by Troll
 - February 01, 2015, 08:20:00 AM

Those fuel cells don't have a pump in them for the injection, so I'm not sure how you would feed your fuel system. Should work ok on a carbed engine,since gravity is ALMOST always available...

Posted by JagLite
 - January 31, 2015, 22:04:43 PM

Great find RatMan!
Tour Tank looks like just the thing at reasonable prices for my needs.
Thanks for the link.

Posted by CDNRatMan
 - January 31, 2015, 19:56:52 PM

  ok good idea with those and I do have a set of bags for long trips and could find a place for on of them to go someplace safe on the bike, 1/4 of a gal would get you far enough to really make you mad or to a gas station.

here is the one site I found

http://tourtank.com/index.html

Posted by Bucko
 - January 31, 2015, 19:13:58 PM

You don't need to worry about venting, just don't over fill them - there's usually a line marked on the outside that indicates the max fill.

Posted by gdrudd13
 - January 31, 2015, 18:48:29 PM

I actually use a fuel bottle (I just got a second one also). These are what I have in the 30 oz. size. It comes out to about 1/4 gallon per bottle.

http://www.amazon.com/MSR-11831-Fuel-Bottle-20oz/dp/B0015HV75O/ref=sr_1_1?ie=UTF8&qid=1379344743&sr=8-1&keywords=fuel+bottle

I don't really have actual mounts for them because I just throw them into the saddlebags. I've never had them leak yet but I also only carry them on trips or when I'm going for a long ride (I got lost once to the point I needed the GPS I brought and was on reserve when I got to the gas station so now I carry them lol). I have a smaller one that I use for my backpacking stove and I've never had issues with it leaking, and it not having a vent has never been an issue either and it stays in my garage year round. With temperature swings from summer to winter of over 100° F, I'd say that speaks well for the construction.

If you do decide to mount it to the frame somewhere, I would go with something like this (I have no idea if this actually fits the bottles or not) that covers the whole thing. It would be slightly unnerving hearing rocks or other road debris pinging off of the bottle as I was riding knowing it was filled with gas.
http://www.quadratec.com/products/98003_0021.htm

I use this mount in my Jeep, and they do a good job of securing an extinguisher.
http://www.quadratec.com/products/14018_120X_A_PG.htm

If you don't care about it being covered, and want it mounted, I would mount a plate to the frame and use a few hose clamps to attach the bottle to the plate. That would make it much cheaper.

Posted by chief
 - January 31, 2015, 17:48:06 PM
Quote from: Troll on January 31, 2015, 17:44:09 PM

AND with out a vent, they shrink down and collapse when it gets cold out, unless they are full.

We don't put them in a freezer, and it will never get that cold during any riding season down this direction!!!

Posted by Troll
 - January 31, 2015, 17:44:09 PM
Quote from: greenbarn on January 31, 2015, 15:47:53 PM

Actually, I think you need one that "doesn't" vent, don't you?  All of the gas cans sold around here, for the past several years, are required by CARB and EPA regulations, to be sealed (non venting).   Makes 'em swell up like a balloon in the sun.

The JP cycles can you linked is evidently NOT vented (• Made of 6-ply HDPE NANO plastic creating a vapor proof (no fumes) barrier)
If you had a gas can vented on the bike, especially in the saddlebag, I think it would make a mess or at the least everything in the bag would smell of gas.

Ratty, if you want one of those, I can order one of those on my next JPC order, and you can pick it up on your way through to Drift IN....

AND with out a vent, they shrink down and collapse when it gets cold out, unless they are full.

Posted by CDNRatMan
 - January 31, 2015, 17:06:50 PM

  ;)  ok know it has something to do with the venting. Can not remember which way it was, but I'll say you are right.

Posted by 49Reo
 - January 31, 2015, 16:49:28 PM

Buy a couple of aluminum water bottles and brackets like cyclists us on their bikes. A couple of hose clamps to hold them to the crash bars and away you go....

Posted by greenbarn
 - January 31, 2015, 15:47:53 PM

Actually, I think you need one that "doesn't" vent, don't you?  All of the gas cans sold around here, for the past several years, are required by CARB and EPA regulations, to be sealed (non venting).   Makes 'em swell up like a balloon in the sun.

The JP cycles can you linked is evidently NOT vented (• Made of 6-ply HDPE NANO plastic creating a vapor proof (no fumes) barrier)
If you had a gas can vented on the bike, especially in the saddlebag, I think it would make a mess or at the least everything in the bag would smell of gas.

Ratty, if you want one of those, I can order one of those on my next JPC order, and you can pick it up on your way through to Drift IN....

Posted by CDNRatMan
 - January 31, 2015, 15:33:59 PM

  Oh here we go. I have been looking at this because up here we have some long stretches between fuel points. when I first bought the bike and went on a ride to my sister's, and not sure of how far I could get. I did the poor man thing and filled a 2 liter soda bottle with gas. Not the safest thing to do.
Those aluminum bottles for white gas they do not vent, or most do not. If you are going to carry gas it needs to be in a container that vents.
I am looking at one of these,

http://www.jpcycles.com/product/721-352?utm_source=google&utm_medium=cpc&device=c&network=g&matchtype=b&gclid=Cj0KEQiAl7KmBRDW6s-Xi_uT9OgBEiQAZdbbSd65WCrAdiXfGPol0Yb8SdCzW2HV0Z2t0qEhvRDS5d8aAhUw8P8HAQ

but have not been able to find one, in the local area. There is a company that does add on tanks for bikes but they are dear.  So brain storming ideas now.....

Posted by greenbarn
 - January 31, 2015, 11:01:27 AM

Anybody use a "spare" fuel bottle.   I know I've seen some posts on this subject here.   I'm considering adding a quart or so or maybe even a whole litre (for you metric folks).    SO looking for the best suggestions for a setup - Safe and Cheap.

I know they make aluminum bottles for camping to store camp stove fuel (basically gasoline) that would work (30 oz, or I've seen a 1.5L version) - and I could use a fire extinguisher bracket made to mount to a buggy roll bar - to mount said bottle to the frame somewhere.....   But looks like I'd have $40 or somewhere in the neighborhood.

Looking to pick some brains for other better-cheaper ideas...    Of course safety is the #1 criteria in the end.

Ideas?

SMF spam blocked by CleanTalk