GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Honestly, short or tall passengers have the same problems. I put a Corbin seat on mine, same problem. The only solution to the pitching forward problem I have found is to radically modify the rear portion of the Corbin seat... perhaps a king/Queen style. What is needed is a flatter design where the rear of the driver seat is the same relative height as the rear of the passenger seat.
The old Travel Horse two-up was a good example. Unfortunately they are no longer around. http://www.vulcandrifterriders.com/drifterseats.htmlThe problem with the seat height issue is that the rear fender moves and needs the clearance, and that's why the seat is higher. About the only way to significantly lower it is to remove a good portion of the padding (there is a lot) and pull the cover tight over the new seat shape. A heavy duty shock in back and heavy duty 1500 springs with maybe some thicker oil in the forks would all help on the pitching issue when stopping. Welding in lower pegs is a good idea as she'll be in a more comfortable riding position. If the pegs are a little more forward she could use them to keep from pitching on stops too. Other then that, I'm not sure what else could be done. Maybe someone else will have another idea or two?
Wondering if anyone else has had this issue... My wife is 6'0 with really long legs 36" inseam the problem is when she rides on the back of my 800 with her feet on the passenger boards it's also a tough ride because with the 2 up seat and the back seat so much higher than the front she pitches forward when we stop.. I was wondering if any one has any ideas I was looking at the 2 up seat from singh as it sits lower and was thinking of maybe having pegs welded lower for her
Page created in 0.083 seconds with 13 queries.