Modify message

Welcome to Vulcan Drifter Riders. Please log in or sign up.

Main Menu

Vulcan Drifter Riders
► DISCUSSIONS
► Drifter 800 Only
► Modify message ( Re: Can I jump start my 800 without removing the seat? )

Modify message

The message has the following error or errors that must be corrected before continuing:: Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.

Subject
Message icon
Reason for editing

Two answers here..

First the seat..remove the bolts securing the seat and replace them with wing (butterfly) bolts then you don't need tools to remove the seat..

Second.. go to a scrap yard and get a thick red battery lead, about 10" is more then enough, it has a ring connector on one end that will easily bolt to the positive post of your battery, feed the other end of the lead out to one side where you can clip on to it.. A dab of solder will prevent the exposed end from fraying or splaying..now go to your local TV repair shop and they sell 7mm coaxial cable which they get delivered on 100 metre reels..the end of the cable is protected by a small rubber cap about 1/2" long and they will probably give you one..just press this over the bare end of your new lead and this will prevent it from shorting to the frame..

Now all you need to do is pull the rubber cap off, connect the positive jump lead to the new cable end and connect the negative jump lead to the bare frame or engine..

Or you could just buy a new battery and check the charging system with a $10 digital multimeter from Home Depot.

John

Attachments: (Clear attachments)

Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB

Uncheck the attachments you no longer want attached

Click or drag files here to attach them.

Insert width (px):

Insert height (px):

(Clear attachments)

Other options

Lock this topic
Return to this topic
Don't use smileys
Move this topic

Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by gdrudd13

- October 15, 2014, 16:05:03 PM

can you not do that with efi motorcycles? I know you can with efi cars, etc. I've done it with both of mine (perks to having manual transmissions).

Posted by pcarrell

- October 15, 2014, 15:24:12 PM

Yeah, you push it along with the clutch pulled in, then once you're moving at a decent clip you pop the clutch and the motor turns over.

Posted by gdrudd13

- October 15, 2014, 09:01:34 AM

Pop start? Is that the same as push starting?

Posted by pcarrell

- October 15, 2014, 08:52:00 AM

Since your bike is carbed, couldn't you just pop start it?

Posted by gdrudd13

- October 15, 2014, 07:58:27 AM

There isn't anything stock that I'm aware of. I've used the plug for my battery tender once, and I've heard of people on other bikes wiring in a few extra leads for this exact reason.

Posted by Dcardova

- October 15, 2014, 06:49:14 AM

Was just curious about this. Since I have a 2 up seat and bags on those 4 bolts...I was wondering if there is an easier emergency way to jump start without removing the seat? I'm not an electrical guy....but there must be a more readily available positive lead to use to connect jumpers or battery charger cables? Thx

SMF spam blocked by CleanTalk