Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Varooom
 - October 14, 2010, 16:31:08 PM

You can use an automotive floor jack under the frame to the right rear to get the rear tire off the ground.  Found it easier than it sounds.  Block the front tire.
Varooom

Posted by chief
 - October 13, 2010, 12:42:32 PM

Some basic info

http://www.vulcandrifterriders.com/Rearwheel.html

Also have attached a pdf file from the manual.

I strongly suggest you purchase a Kaw manual and Clymer's.

Posted by aclone
 - October 13, 2010, 09:17:16 AM

Just did mine on my 2002.  Gadgets page has info on removing the rear wheel. You don't have to remove the fender if you have a motorcycle jack.  It does help to have a second person keeping the bike steady when you do remove the wheel. It took me two tries to install the rear wheel but it was not that bad.  Got my rotor from cheap cycle parts on the web they had the best price.  good luck Mark                                                                                                                                                                                                                                                                                                                                     http://www.gadgetjq.com/gadgetsfixitpage.htm

Posted by scwilli
 - October 12, 2010, 20:13:10 PM

anyone

Posted by scwilli
 - October 10, 2010, 14:05:24 PM

Anyone know a good guide to replacing the rear rotor on a 99 drifter 1500?  Never done much work on a cycle before and dont want to screw something up out of ignorance.

SMF spam blocked by CleanTalk