Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Troll
 - August 18, 2014, 16:24:10 PM

I'm just going to say this about that...the KAW throttle sleeve is a different (smaller) diameter than the Harley sleeve those grips were probably made for, so you are going to have to make up the difference with something... I used old fashioned friction tape, and then grip cement to hold it together..

Posted by 49Reo
 - August 18, 2014, 15:30:32 PM

Try a SAWZALL..... ;D

Posted by CDNRatMan
 - August 18, 2014, 12:11:12 PM

  lol was just going to go and take pictures and such , but I used ISO grips.....

Posted by scamp62
 - August 18, 2014, 12:09:21 PM

Never mind ! Just cut into it and all is fine

Posted by scamp62
 - August 18, 2014, 10:35:41 AM

I would like to change out my standard hand grips with natural rubber, coke bottle type, But how dose one do this on the throttle side ? Dose the rubber & plastic chrome come off the throttle sleeve ? I really just don't want to tare in to it, and end up with a new trashcan decoration. Any help would be appreciated !

SMF spam blocked by CleanTalk