We limit access by GUESTS to protect our members from spam, hacks and trolls. Please register to gain access to all our resources.
Posted by greenbarn
- June 09, 2014, 21:41:23 PM[ot]
Quote from: CDNRatMan on June 09, 2014, 08:04:52 AMAnd texting .... don't forget texting... while putting on makeup, and reading the paper. [/ot]Now see GB, letting people know about your vices now you have people doing dangerous things like riding with their head in the gap. Next they will be riding and smoking at the same time and talking on the phone, with no helmets on......
Draconarmy, I noticed the same thing (but I actually just put my hand down there) not much wind at all. Actually, I don't know, but I think it might somehow reduce the turbulence , not sure.
Posted by CDNRatMan
- June 09, 2014, 08:04:52 AM[ot] Now see GB, letting people know about your vices now you have people doing dangerous things like riding with their head in the gap. Next they will be riding and smoking at the same time and talking on the phone, with no helmets on......[/ot]
Posted by draconarmy
- June 09, 2014, 05:08:22 AMso this thread got me thinking the other day and while i was riding on a less populated stretch i stuck my face down near the gap between my ws and the headlight. even at 40mph i felt little to no wind getting through. so unless you just dont like the look inho dont "mind the gap" sorry for that pun.
Posted by CDNRatMan
- June 08, 2014, 23:41:48 PM[ot] 
wow you sure live on the edge......only thing you missed on your vices list were gambling and drinking.....[/ot]
Posted by greenbarn
- June 08, 2014, 22:53:00 PM[ot]Not very often, and not very far..... I also occasionally take short drives in the truck without a seatbelt, eat too much meat and desserts, and have a (very) infrequent cigar... Nobody's perfect[/ot]
Posted by CDNRatMan
- June 08, 2014, 20:52:04 PM[ot] ok wait Troll, nothing wrong with the Hawaiian shirt thing,
GreenBarn you wear a ball hat while riding, you who is a father and a husband and have people depending on you and need you to provide for them...how reckless that is of you......[/ot]Posted by greenbarn
- June 08, 2014, 20:24:35 PM[ot]LOL. not so much....[/ot]
Posted by Troll
- June 08, 2014, 19:05:58 PM[ot]You wearing a Hawaiian shirt and shorts, and white tennies, too...just like the gold wing guys?[/ot]
Posted by greenbarn
- June 08, 2014, 18:56:49 PMNo, just talking about a ball cap. without a helmet. I can actually wear a baseball cap, with the bill forward, like I see the dudes on Goldwings.
Disclaimer: I only rarely do not wear a helmet.
Posted by CDNRatMan
- June 08, 2014, 17:55:17 PMQuoteyour helmet gets blown off with a visor?I notices I can ride with a ball cap on, bill forward, and it doesn't blow off. On the 800 no way
Posted by greenbarn
- June 08, 2014, 17:50:55 PMThanks for the info Goose and everyone else. I have noticed a big difference in turbulence between the 800's shield and the 1500. On the 1500, I notices I can ride with a ball cap on, bill forward, and it doesn't blow off. On the 800 no way. lots of helmet turbulence. Part of this may be height - the 1500 is way too high. But then I realized maybe that 3" gap above the headlight may be doing something to reduce turbulence in the head/face area?? Also, shield angle might be something too. I believe I have the 800's tilted back as far as I can, in order to get it low enough to see over. Does a more straight vertical shield angle produce less turbulence???
I see a lot of "how to's" on various windshield mfg and seller sites, for fitting your windshield to your personal size, but they always just talk about height - none of them that I could fine deal with angle.
Posted by Gooseberrie
- June 06, 2014, 19:31:13 PMThis topic is more about the screens shape and yours are all tighter to the fork then mine, anyhow this is my sub-frame on a picture from behind since I mentioned it. It attaches under the handlebar risers only and is adjustable in all directions.
The large gap under the screen provides ventilation and high air pressure to the front could force bikes going straight in bends. This is especially noticed on lighter motorcycles with big screens. Our Drifters have large springs and could be unforgiving because of their weight. Handling characteristics and safety only improve when more air can move around it.
Another thought. Who knows what road dirt comes up from below when the windscreen is less ventilated. I experienced all sort of light objects behind the screen on another bike and you would not want many more of those small surprises.
Posted by CDNRatMan
- June 03, 2014, 22:17:52 PMI found this site which is were I will be ordering a new screen over the winter from because I am just going to use the old hardware and some powder coating......
http://www.7jurock.com/store/index.php?act=viewProd&productId=47
Posted by greenbarn
- June 03, 2014, 21:53:20 PMQuote from: draconarmy on June 03, 2014, 11:28:51 AMThat doesn't sound like too bad of a deal. I'll have to look into that one.the reason that you cannot use a ws from a classic is a very slight difrence in the top tripple tree. this is for us the lack of threaded holes that the classic has. i ran into this issue my self when i purchased the memphis slim. now what you can do if you are brave enough is drill and tapp these holes into the tripple tree. it is a little hair raising due to the alluminum construction and the close proximity to the forks but it will work. on a side note i did ride around with that memphis just held in place by the lower bolts of the mount and other than a slight vib/ hum had no issues, but that was only temporary not sure how much stress that would put on the mount itself
Posted by draconarmy
- June 03, 2014, 11:28:51 AMthe reason that you cannot use a ws from a classic is a very slight difrence in the top tripple tree. this is for us the lack of threaded holes that the classic has. i ran into this issue my self when i purchased the memphis slim. now what you can do if you are brave enough is drill and tapp these holes into the tripple tree. it is a little hair raising due to the alluminum construction and the close proximity to the forks but it will work. on a side note i did ride around with that memphis just held in place by the lower bolts of the mount and other than a slight vib/ hum had no issues, but that was only temporary not sure how much stress that would put on the mount itself