GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by Troll
- April 28, 2014, 18:45:08 PMHere, check this out: You are not the first one to have to deal with this...http://www.vulcandrifterriders.com/tbracket.html
Posted by Dubliner
- April 28, 2014, 18:21:24 PMYes there's one hole for the peg and a rubber insert hole for the pipe it came with, (it's just a 2 inch straight piece welded onto exhaust pipe. ). So short of making a bracket that transitions from the one frame hole to the two V&H bracket holes, would anybody know what is missing? My much sought after RS bracket is giving me a headache.
Posted by Troll
- April 28, 2014, 18:04:30 PMHow many holes in the foot peg bracket? Just 1? Does that one hole have a rubber insert? If yes, then you have the much sought after r/s classic bracket with the rubber mount. The Drifter has a dual bolt bracket that lines up with the V&H mounting, but mounts the pipes without insulation.....The original exhaust has a long, rubber mounted bracket/support for the stock muffler, and uses/needs a rigid mount at the foot peg.
Posted by Dubliner
- April 28, 2014, 17:32:04 PMOk, got my new V&H longshots but it came with a black mounting bracket that fits two holes where stok exhaust was. My problem is I didn't have stock on there and the pipes I did have we're only held on by one bolt/bracket that fit onto a hole on the rear foot peg bracket. Any ideas? There's no diagrams with thE V&H so I can't really tell which orientation the bracket should take as it doesn't seem to match up with the single mounting hole on the peg mount. Tia.
Posted by pcarrell
- April 23, 2014, 18:20:04 PMQuote from: greenbarn on April 23, 2014, 09:58:26 AMGoes without saying......Don't forget your tags and registration fees.... You can be sure they want their MONEY too.....
Posted by Dubliner
- April 23, 2014, 15:05:43 PMWell it's the thought that counts, good karma for you BikerBob. 
Posted by bikerbob5864
- April 23, 2014, 13:13:59 PMShoot!......I just last week dumped a complete OEM Exhaust!!!!! I KNEW I should have kept it........someone may need it.....
but I'm such a parts pack-rat I have to thin things out every once in a while. I would have given it up for the shipping cost.
Sorry Dubs.............
Posted by Dubliner
- April 23, 2014, 11:25:50 AMThanks all , I've decided to go with the V&H long shots.
Posted by greenbarn
- April 23, 2014, 09:58:26 AMQuote from: pcarrell on April 23, 2014, 08:56:14 AMIn Indiana they couldn't care less what you run. You can run straight pipes if you want. Shoot, if you're over 18 years old, we don't even have helmet laws! About all they care about is if you have all your lights and a horn!
Don't forget your tags and registration fees.... You can be sure they want their MONEY too..... 
Posted by Dubliner
- April 23, 2014, 09:32:22 AMOK, so TRoll has a stock minus the Cat, would anybody have a cat for sale. I don't want to have to replumb the exhaust. I need a bolt on solution. Thanks all.
Posted by pcarrell
- April 23, 2014, 08:56:14 AMIn Indiana they couldn't care less what you run. You can run straight pipes if you want. Shoot, if you're over 18 years old, we don't even have helmet laws! About all they care about is if you have all your lights and a horn!
Posted by jmbo
- April 23, 2014, 07:28:08 AMHere in southeastern Wisconsin we have mandatory vehicle emission inspection in a limited number of counties. As luck would have it mine is one of them even though I live three blocks from the boundary. So far motorcycles are not required to pass any inspection.
Posted by bikerbob5864
- April 23, 2014, 00:49:47 AMcheck with Jireh Cycles...............they have all in one fishtails.........also Samson........check with them too. They have a same side fishtail dual setup in 2 1/4" header pipe. Pure straights they are.
Posted by Dubliner
- April 22, 2014, 21:23:06 PMAccording to a very knowledgable friend just told me they're not mandatory in Texas so are you saying that's isn't accurate?
Posted by greenbarn
- April 22, 2014, 21:10:26 PMQuote from: Bake on April 22, 2014, 20:27:51 PMDubs... Depends on your local for the Goat Bladder... If you're in Cali... Pretty much better have it... Check with your State DMV Inspection Laws to make sure... Here in Pa you don't have to have the stock exhaust as of yet... However they did just pass a new law if you're caught without a valid Inspection Sticker (Any Vehicle) it's an automatic $500.00 fine and 6 months loss of license... Cha-Ching for the State!
You betcha - because you can be sure that 6 month suspension is followed by a REAL healthy reinstatement fee!