GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Here in southeastern Wisconsin we have mandatory vehicle emission inspection in a limited number of counties. As luck would have it mine is one of them even though I live three blocks from the boundary. So far motorcycles are not required to pass any inspection.
check with Jireh Cycles...............they have all in one fishtails.........also Samson........check with them too. They have a same side fishtail dual setup in 2 1/4" header pipe. Pure straights they are.
According to a very knowledgable friend just told me they're not mandatory in Texas so are you saying that's isn't accurate?
Quote from: Bake on April 22, 2014, 20:27:51 PMDubs... Depends on your local for the Goat Bladder... If you're in Cali... Pretty much better have it... Check with your State DMV Inspection Laws to make sure... Here in Pa you don't have to have the stock exhaust as of yet... However they did just pass a new law if you're caught without a valid Inspection Sticker (Any Vehicle) it's an automatic $500.00 fine and 6 months loss of license... Cha-Ching for the State!
You betcha - because you can be sure that 6 month suspension is followed by a REAL healthy reinstatement fee!
Dubs... Depends on your local for the Goat Bladder... If you're in Cali... Pretty much better have it... Check with your State DMV Inspection Laws to make sure... Here in Pa you don't have to have the stock exhaust as of yet... However they did just pass a new law if you're caught without a valid Inspection Sticker (Any Vehicle) it's an automatic $500.00 fine and 6 months loss of license... Cha-Ching for the State!
Hi guys, do I need the "goat bladder" to pass inspection? Currently I appear to have almost hollow pipes on my bike but another member has a stock 2-1 exhaust minus the "gb" for sale.
The pipes and tails are all one piece but have no markings that I can find. At least I can follow your solution for the same look though. Doubt I'll find exactly what I have now, and the left side is the same age so I probably should replace both now. I like the 2 into 1 look with a fishtail, do you know who makes that?
Those tails look similar to mine, Mine are Vance & Hines that I adapted to my Cobra pipes, I got them off Ebay, Do your tips slip into the pipes? If they are Vance & Hines you should be able to get them through their site or at least you'll know what to search for on the Ol' InterWeb, Hope this helps. Bake
Not knowing what brand they are, I'd say try J&P Cycles. They might have something.
Close up on manifold end.
Had lots of noise after a ride the other day, and took a look to find that this was wrong. I have two single fishtails and this is the front one. Any ideas where I'd get a replacement or what I might do? Tia Dubliner
Page created in 0.064 seconds with 12 queries.