Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by John Hopkins
 - April 10, 2014, 18:28:56 PM

I haven't got a noticable delay on mine, but I haven't analyzed my starting procedure..I wear a full face helmet before riding, it's the law over here, and I can't remember if I put the helmet on before I turn the key or after, that would take time..I have been doing this for so long that I am on 'automatic'..If I had to guess I would say " I put the key in and turn it, then  lean the bike upright, kick the stand up and just press the starter." I don't think that would take 30 seconds..

It sounds like the fuel pump is priming the supply rail for the injectors each time so I wonder if you have a dirty fuel filter restricting the flow of fuel, or more likely a fuel leak around the filter, If you leave the bike parked and full of fuel do you smell fuel when you come back or is it parked outside and any smell from a leak blown away on the wind..

John.

Posted by chief
 - April 10, 2014, 10:42:53 AM

What Troll said... same on mine.

Posted by moosewing3
 - April 09, 2014, 19:39:56 PM

Will give it a try when I get home from work tonight, thanks Troll. With those pipes I have on I don't think I wil be hearing the pump run after I've spent more than five minutes on it lol, may have to buy some hearing protection.

Posted by Troll
 - April 09, 2014, 18:31:43 PM

Try this: Squeeze the clutch when you go to start. Mine has no "delay" at all. I let the fuel pump cycle and then push the button. On a hot restart, I don't usually wait for the pump...sometimes I can't hear it, anyway.

Posted by moosewing3
 - April 09, 2014, 17:31:09 PM

I had previously posted about a delay from when you push the starter to it actually engaging the starter. I have noticed that this delay seems to be getting longer. I turn on the key, hear the injectors cycle, then a series of clicks from what sounds like the battery area, but a really long delay before the starter actually does anything. A couple of you mentioned that this happens with yours also, the delay on mine is almost 30 seconds, does anyone elses take this long?

SMF spam blocked by CleanTalk