Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by VN1500
 - July 27, 2010, 14:19:01 PM
Quote from: plevine1 on July 27, 2010, 00:36:08 AM

That's what thought but..... there is one screw facing up. It looks like if I removed that screw I would be able to adjust the height of the heel shift. No such luck. I don't see any other screws.

There is a "pinch-bolt" for each lever, one goes in from the top,the other goes in from the bottom. They can be set anywhere on the spline ya like. They will come off without removing the board......Ron
Posted by Varooom
 - July 27, 2010, 04:45:09 AM

My toe shifter came lose while riding once and the heel got me home.  Just adjust them to where you like them.  Way better than other makes.  Barely have to lift your heel.
Varooom

Posted by plevine1
 - July 27, 2010, 00:36:08 AM

That's what thought but..... there is one screw facing up. It looks like if I removed that screw I would be able to adjust the height of the heel shift. No such luck. I don't see any other screws.

Posted by chief
 - July 26, 2010, 20:54:16 PM

Yes they are on a splined shaft and can be adjusted. It's obvious how when you look at it

Posted by plevine1
 - July 26, 2010, 19:52:44 PM

Anyone know if the heel toe shift can be adjusted on a 99 Drifter. My toe shift seems to high and the heel is to low and to top it off I think someone has been sleeping in my bed, oups, wrong bed time story.

SMF spam blocked by CleanTalk