Modify message

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.
Attachments: (Clear attachments)
Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB
Uncheck the attachments you no longer want attached
Click or drag files here to attach them.
(Clear attachments)
Other options
Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Troll
 - April 03, 2014, 16:18:01 PM

The only motorcycles I can think of that still use the cap are Harleys..As far as I know, NOBODY else does

Posted by John Hopkins
 - April 03, 2014, 16:12:46 PM

I don't know of any motorcycle made since 1980 that uses the screw on cap..

John.

Posted by HOPPY106
 - April 03, 2014, 14:48:00 PM

Hello All,
I just changed the rear spark plug on my 2003 Drifter 800 (did not have time to get to the much more difficult front plug). When I pulled the plug, I noticed that the little screw-on cap was missing from the plug (just the threads remained). I pushed the plug into the rubber boot and it sort of ratcheted as it went completely into the boot (seemed very solidly connected).
My question is: are the spark plugs properly installed without the screw-on cap on the 800 Drifter?
I reinstalled the rear plug and the engine ran perfectly, but I'm concerned that the plug may be installed incorrectly if the cap is missing and/or maybe stuck up inside the rubber boot.
Thanks for the help.
Hoppy

SMF spam blocked by CleanTalk