GUEST? Registration opens up many more resources which are not available to guests. Registration is free, we never sell or give others access to your information.
Posted by CDNRatMan
- March 25, 2014, 15:17:17 PM Troll, I have a question now.
I do not profess to be a mechanic or even close to one so this might be a weak question. So there is 2 bulbs in the speedo housing, for simplicity sake one is the upper and then the lower, because that is were they sit in the housing.
You said
Quotebut the power is from the high beam circuit. Sooo this mysterious "lower" bulb is actually working as designed.
So tonight I tried to see if there was power going to the plug, had a good ground, tester was showing power to a couple of the plug outlets. But none to the one I want. I tried it with the high beam on and off. Tried it with the key in the on position.
Ok so on the 800 the headlight does not come on till the bike is started and running, so to check this would the bike have to be running? Even I draw the line at starting the bike in the living room.
Thanks.
Posted by Milky1112
- March 25, 2014, 13:56:57 PMQuote from: CDNRatMan on March 25, 2014, 13:49:53 PMFair enough, Just glad the mystery is solved for sure tho.. so we don't sit here and lose our minds anymore then we have already..ok but you are half way to the picture list....just to let you know.
Posted by CDNRatMan
- March 25, 2014, 13:49:53 PMok but you are half way to the picture list....just to let you know.
Posted by Milky1112
- March 25, 2014, 13:41:12 PMQuote from: CDNRatMan on March 25, 2014, 13:27:09 PMHey now! I'm helping.. and causing trouble lol.. Remember i'm new to this bike unlike you vets hereAsk PC what happens to people I am not happy with........
Posted by CDNRatMan
- March 25, 2014, 13:27:09 PMAsk PC what happens to people I am not happy with........
Posted by Milky1112
- March 25, 2014, 13:26:05 PMQuote from: CDNRatMan on March 25, 2014, 13:24:11 PMYep, now i have everyone ripping their speedometer apart too.. mwuahahahaha.. my evil plan is working!lol....ok never noticed that it was that way......but now I can check farther and see if it is right...........that Milky guy sure had us confused......
Posted by CDNRatMan
- March 25, 2014, 13:24:11 PMlol....ok never noticed that it was that way......but now I can check farther and see if it is right...........that Milky guy sure had us confused......
Posted by 2beers
- March 25, 2014, 13:04:29 PMQuote from: Troll on March 25, 2014, 12:47:44 PM2beers is askeered of the dark lolLet me ask you a question...do none of you ride at night?
I was just going to post a pic of the wiring diagram, Troll, answering that high beam question! You beat me to it 
Posted by Milky1112
- March 25, 2014, 12:57:30 PMQuote from: Troll on March 25, 2014, 12:47:44 PMOnly when my eyes are closed...Looking carefully at the wiring diagram reveals that there is just 1 illumination bulb for the speedo, and the other one uses the same ground, but the power is from the high beam circuit. Sooo this mysterious "lower" bulb is actually working as designed...talk about a rabbit hole! Let me ask you a question...do none of you ride at night?
Posted by Troll
- March 25, 2014, 12:47:44 PMLooking carefully at the wiring diagram reveals that there is just 1 illumination bulb for the speedo, and the other one uses the same ground, but the power is from the high beam circuit. Sooo this mysterious "lower" bulb is actually working as designed...talk about a rabbit hole! Let me ask you a question...do none of you ride at night?
Posted by Milky1112
- March 25, 2014, 06:25:51 AMQuote from: CDNRatMan on March 24, 2014, 22:02:31 PMLet me know what you find.. cause i'm soon to be doing the same thing.. Just strange that it suddenly goes out when all you do is disconnect the connector..I could not get any power at the socket, and none along the length of the wire, but I'll spend tomorrow after work checking it again and check the ground also.
Posted by CDNRatMan
- March 24, 2014, 22:02:31 PMI could not get any power at the socket, and none along the length of the wire, but I'll spend tomorrow after work checking it again and check the ground also.
Posted by 2beers
- March 24, 2014, 20:33:46 PMQuote from: Milky1112 on March 24, 2014, 19:47:06 PMDidn't want that oil pressure light thing to be contagious, that's for sure! And i'll be checking my lower light tomorrow...Got my bulbs today.. put things back together... oil pressure light didn't work.. Oh i started to curse you 2beers!!!!! Turns out.. socket was a tad loose... Pulled back apart, tightened back up.. Works like a true pilsner... Now the BAD: One of my speedo bulb sockets quit working (lower) So time to replace that.
Posted by Milky1112
- March 24, 2014, 20:06:00 PMQuote from: CDNRatMan on March 24, 2014, 19:49:07 PMYour lower bulb out too??? Mine was blown when i got the bike, didn't think anything of it.. changed them out with new bulbs.. They share a common ground (for the lower part of the speedo and upper) So i think it may be a bad socket... Problem is finding one without replacing the entire harness... When a couple splices will do the trick.That is the one not working on my speedo. I traced the lack of power all the way back to the igniter. So it will remain not working......
Posted by CDNRatMan
- March 24, 2014, 19:49:07 PMThat is the one not working on my speedo. I traced the lack of power all the way back to the igniter. So it will remain not working......