Modify message

Welcome to Vulcan Drifter Riders. Please log in or sign up.

Main Menu

Vulcan Drifter Riders
► DISCUSSIONS
► Drifter 800 Only
► Modify message ( Re: Drifter 800 for my wife )

Modify message

The message has the following error or errors that must be corrected before continuing:: Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic.

Subject
Message icon
Reason for editing: Last Edit: February 06, 2014, 16:42:36 PM by pcarrell

Ya know, you're close enough to Japan that it might make sense to look at getting a Drifter 400.  Those were Japan only models, and getting one exported would make it the first 400 outside of Japan that I know of.  To top it off, it might be more the size you need for the wife.  The seat height is almost 1/2" lower to start with.  http://www.motorbikes.be/en/Kawasaki_VN_400_Vulcan_Drifter_2004.aspx

Most of the rest of the specs I can find look the same as the 800, so if it's running an 800 frame, any lowering kits that work on an 800 should work on the 400 too.  Of course, you'd want to do some more research to be sure, but according to some, it really is an 800 bike with a 400 motor: http://www.kawasakimotorcycle.org/forum/kawasaki-cruisers/99750-vn400.html (sorry Chief, but the info happens to be on another forum.  Don't worry though.....this forum is so good we won't lose any members to that other place!)

Just think.....you could be the only forum member to have a 400 Drifter!   8)  You could have your own page with stats and tips, etc., and come Drift-In time, ship that baby over here and you're the instant hit of the event!   ;D

Just a thought.......

Attachments: (Clear attachments)

Restrictions: 6 per post (6 remaining), maximum total size 64.00 MB, maximum individual size 29.30 MB

Uncheck the attachments you no longer want attached

Click or drag files here to attach them.

Insert width (px):

Insert height (px):

(Clear attachments)

Other options

Lock this topic
Return to this topic
Don't use smileys
Move this topic

Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Washbrook

- February 05, 2014, 22:23:33 PM

Thanks for all the suggestions, they are appreciated. I will check it all out. It may be all academic if they do not allow me to import the 800, not sure why they would not but I am still waiting to hear back. If I get a yes then I will need to source the 800 from the States somewhere, comments on the best year to buy? As I said, I know my 1500 but nothing about the 800.

Greenbarn, I was surprised re the Corbin seat comment as I had thought that going for a Corbin might actually help with the lowering a little as the Corbin on my 1500 sat me lower [but wider or at least that's how it felt] than the stock seat. We would go for a solo not a 2 up.

2beers 50mm = 2" so 60mm is about 2 1/3".

I have had a bad experience with Scootworks, I paid for a longer brake pedal last year and am still waiting so a little reluctant to rely on them but maybe going through Hellraisers might help.

My wife is 5'2" by the way, yes short but cute.

Again thanks for the comments and pointers.

Posted by Drift1

- February 05, 2014, 17:42:31 PM

I'm going to go out on a limb here and say depending on the preference of seat style your looking for , Washbrook . You can simply lower or raise the comfort zone , on height adjustment on a sprung seat by the size of springs you choose for individual comfort . For example , I'm 6' so my comfort height spring is 4 1/2 " tall as someone shorter would need a shorter spring . Or like 2beers bride has suggested you always have the option of shaving the stock seat with a lowering kit . Again , it's all about the preference style seat for ones liking . Keep us posted on the outcome and good luck to the miss's on her new to her drifter if it pans out that is .

Posted by 2beers

- February 05, 2014, 16:55:24 PM

P.S. Remember to order a shorter kickstand if you're lowering an 800 The Kawasaki Voyager kickstand that was recommended to me was the perfect solution!

Posted by 2beers

- February 05, 2014, 16:49:18 PM

2 Beers Bride, here. My 800, stock, left me with toes barely touching the ground and I'm 5'1". I ordered the Scootworks rear lowering kit through Hellriser Customs (they had the kit in stock, and there were availability issues directly through Scootworks).

We installed it on the middle setting for 2" (it can be set to lower 1", 2" or 3"). I'd read that 2" was about max to lower the Drifter front end, and I wanted to keep the lowering of the front and rear equal. I used the Progressive Spring lowering kit on the front end.

You're looking for 60mm which is a little less than 2 1/2", if my American brain converts that correctly. Princess is a full 2" lower now than Blue (hubby's 800). I'm reaching the ground much better now but would like to lose another 1/2" or more, so I'm having the stock seat shaved when it is recovered. Princess handles the same as she did before she was lowered, btw.

Good luck with your decision!

Posted by greenbarn

- February 05, 2014, 07:56:41 AM

washbrook - the seat makes a big difference too. I'm 5'8 and perfectly confortable on the stock seat, but my corbin 2-up sits a bit higher and i have to reach to get my feet on the asphalt. I suspect some of the custom solos, on the other hand, will lower the seat height significantly, at least by their appearance. What do you say D1??

Posted by CDNRatMan

- February 05, 2014, 07:11:25 AM

There is a lowering kit from Scooter Works, and progressive makes a rear shock that is about 1" shorter then stock, in the 456 series.
DriftinGril has posted a thread about lower her ride, and I think 2beers has a lowering kit in hers.

http://www.vulcandrifterriders.com/forum/index.php?topic=17867.0

Posted by Washbrook

- February 04, 2014, 22:12:05 PM

I currently ride a 1999 Drifter 1500 but know little about the 800. My wife ride a yamaha. I am looking at the costs of importing an 800 to Australia for her to ride. My wife is short and looking at the seat height the bike will need to be lowered if she is going to be able to ride it.

Now to my question, is there a lowering kit / set up that will allow me to lower an 800 so the seat height is about 60mm lower? I run progressive s on my Drifter but they do not seem to have a lowering kit for the 800.

I look forward to your learned comments.

SMF spam blocked by CleanTalk